553C Wheel Feller Buncher Caterpillar


Fuses - Replace

Usage:

553C PGR


NOTICE

Replace the fuses with the same type and size only. Otherwise, electrical damage can result.

If it is necessary to replace fuses frequently, an electrical problem exists. Contact your Caterpillar dealer.


Fuses - The fuses protect the electrical system from a circuit that has been overloaded. Change a fuse if the element separates. If the element of a new fuse separates, check and repair the circuit.



Illustration 1g02657517

The fuses are located in the right-hand console. The following list identifies the circuits that are protected by each fuse. The amperage for each fuse is included with each circuit.

Lift Pump (1) - 10 A

UHT Electric Fan (2) - 15 A

Accessory (3) - 15 A

HVAC Blower (4) - 15 A

XA2 Front (5) - 20 A

XA2 Front Cab (6) - 20 A

Rear/Side Floodlight (7) - 20 A

Front Floodlight (8) - 20 A

12 V Converter (9) - 20 A

Spare (10) - 20 A

Seat Compressor (11) - 10 A

Blank Fuse (12) - 10 A

Auxiliary (13) - 10 A

Product Link (14) - 10 A

Joystick (15) - 10 A

MD3 (16) - 10 A

Blank Fuse (17) - 10 A

MD3 (18) - 10 A

Product Link (19) - 10 A

Key Switch (20) - 10 A

Caterpillar Information System:

553C, 563C and 573C Wheel Feller Bunchers IQAN Monitoring ; Control System Show Logs
C2.6 and C3.3B Engines for Caterpillar Built Machines Exhaust Gas Recirculation Valve - Assemble - C3.3B Tier 4 Interim/Stage 3A
359-3896 Lifting Bracket Group{0599, 0629, 1122, 7000, 7156, 7505} 359-3896 Lifting Bracket Group{0599, 0629, 1122, 7000, 7156, 7505}
C15 and C18 Engines for Caterpillar Built Machines Fuel Manifold (ARD) - Remove and Install
Product Identification Numbers (PIN) Location Guide Cold Planer
C15 and C18 Engines for Caterpillar Built Machines Fuel Transfer Pump - Remove and Install
440 and 450 Backhoe Loader Daily Inspection
C15 and C18 Engines for Caterpillar Built Machines Fuel Filter Base - Remove and Install
Product Identification Numbers (PIN) Location Guide Forest Machine
553C, 563C and 573C Wheel Feller Bunchers IQAN Monitoring ; Control System Show Module Information
3500B Engines for Caterpillar Built Power Modules Cylinder Head
3516B and 3516C Engines for 789D Off-Highway Trucks Engine Oil Pan
773G and 775G OFF-Highway Trucks Machine Systems Metering Pump (Steering) - Remove and Install
Product Identification Numbers (PIN) Location Guide Reclaimer Mixer
553C, 563C and 573C Wheel Feller Bunchers IQAN Monitoring ; Control System Description of Measure Screens
420F, 428F, 430F, 432F, 434F and 444F Backhoe Loaders System Schematic
553C Wheel Feller Buncher Reference Material
Product Identification Numbers (PIN) Location Guide Compactor (Soil)
988K XE Wheel Loader Crankshaft Vibration Damper - Inspect
C2.6 and C3.3B Engines for Caterpillar Built Machines Exhaust Gas Recirculation Valve - Remove and Install - C3.3B Tier 4 Interim/Stage 3A
C15 and C18 Engines for Caterpillar Built Machines Exhaust Manifold - Remove and Install
773G and 775G OFF-Highway Trucks Machine Systems Brake Valve and Mounting (Parking) - Remove and Install
Product Identification Numbers (PIN) Location Guide Compactor (Asphalt)
The Product Link Antenna for Certain M and M Series 2 Motor Graders Will be Secured for Transport to Prevent Damage to the Antenna{7606} The Product Link Antenna for Certain M and M Series 2 Motor Graders Will be Secured for Transport to Prevent Damage to the Antenna{7606}
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.