Piston Motor (Hydrostatic)
Show/hide table
 | |
| Illustration 1 | g02825036 |
Show/hide table
| Specifications for 258-2605 Piston Motor Gp | |||
|---|---|---|---|
| Item | Qty | Part | Specification Description |
| - | The rotation of motor is Bidirectional. | ||
| - | The maximum displacement is 842 cc/rev (51 in3/rev). |
||
| - | The minimum displacement is 562 cc/rev (34 in3/rev). |
||
| - | The relief pressure for the flushing valve at 2 L/min (0.53 US gpm) is 2000 kPa (290 psi). |
||
| - | The maximum continuous case pressure is 500 kPa (73 psi). |
||
| - | The maximum case pressure is 1000 kPa (145 psi). |
||
| - | Minimum shift pressure for flushing valve for initial movement of flushing spool is 700 kPa (102 psi). |
||
| - | Maximum shift pressure for flushing valve for initial movement of flushing spool is 1000 kPa (145 psi). |
||
| 1 | Bidirectional port. The rotation of the motor will be counterclockwise if the port is used as an inlet. The rotation of motor will be clockwise if the port is used as an outlet. Maximum inlet pressure is 40000 kPa (5800 psi). Minimum nominal inlet pressure is 35000 kPa (5076 psi). |
||
| 2 | Case drain port. | ||
| 3 | Bidirectional port. The rotation of the motor will be clockwise if port is used as an inlet. The rotation of the motor will be counterclockwise if port is used as an outlet. Maximum inlet pressure at port is 40000 kPa (5800 psi). Minimum nominal inlet pressure at port is 35000 kPa (5076 psi). |
||
| 4 | Inlet port for Brake. Displacement for the brake is 23 cc (1.4 in3). Minimum brake release pressure is 1200 kPa (174 psi). Maximum brake release pressure is 3500 kPa (508 psi). Minimum holding torque for the brake is 4500 N·m (3319 lb ft). |
||
Caterpillar Information System:
Product Identification Numbers (PIN) Location Guide Compactor (Pneumatic)
The Product Link Antenna for Certain M and M Series 2 Motor Graders Will be Secured for Transport to Prevent Damage to the Antenna{7606} The Product Link Antenna for Certain M and M Series 2 Motor Graders Will be Secured for Transport to Prevent Damage to the Antenna{7606}
Product Identification Numbers (PIN) Location Guide Compactor (Asphalt)
773G and 775G OFF-Highway Trucks Machine Systems Brake Valve and Mounting (Parking) - Remove and Install
C15 and C18 Engines for Caterpillar Built Machines Exhaust Manifold - Remove and Install
C2.6 and C3.3B Engines for Caterpillar Built Machines Exhaust Gas Recirculation Valve - Remove and Install - C3.3B Tier 4 Interim/Stage 3A
988K XE Wheel Loader Crankshaft Vibration Damper - Inspect
Product Identification Numbers (PIN) Location Guide Compactor (Soil)
553C Wheel Feller Buncher Reference Material
420F, 428F, 430F, 432F, 434F and 444F Backhoe Loaders System Schematic
553C, 563C and 573C Wheel Feller Bunchers IQAN Monitoring ; Control System Description of Measure Screens
Product Identification Numbers (PIN) Location Guide Reclaimer Mixer
PL87 Pipelayer Power Train Transmission Lubrication Oil Pressure - Test
PL87 Pipelayer Power Train Relief Valve (Torque Converter Inlet) Pressure - Test
2012/02/21 The Painted Interior Cab Color Is Now Black on Certain M and M Series 2 Motor Graders {7301, 7559}
Product Identification Numbers (PIN) Location Guide Articulated Truck
988K XE Wheel Loader Engine Mounts - Inspect
R1600H Load Haul Dump Power Train General Information
259D, 279D, 289D, 299D, 299D XHP, 299D2 and 299D2 XHP Compact Track Loaders, 257D, 277D, 287D, 297D, 297D XHP, 297D2 and 297D2 XHP Multi Terrain Loaders and 236D, 242D, 246D, 262D, 272D, 272D XHP, 272D2 and 272D2 XHP Skid Steer Loaders Lift Cylinder
2012/01/27 New Software Is Now Available for the Cat® Object Detection System (Cat Detect) Used on Certain Off-Highway Trucks {7347, 7348}
R1600H Load Haul Dump Power Train MID 081 - CID 0590 - FMI 09
CP74B, CS74B, CS78B and CS79B Vibratory Soil Compactors Propel System Drum Installation Group
3516B and 3516C Engines for 789D Off-Highway Trucks Air Lines - Aftercooler
CP56B, CP68B, CS56B and CS68B Vibratory Soil Compactors Propel System Control Valve (Shift)