Usage:
START BY:
a. remove oil filter base
1. Remove breather tube (3). Remove bracket (1) that holds the oil level gauge.
2. Remove bolts (2) that hold bonnet (4) to the engine block.
3. Remove oil cooler and bonnet (4) as a unit.
4. Remove bonnet (4) and adapter (6) from oil cooler (5). Remove the O-ring seals from bonnet (4) and adapter (6).
5. Clean the tube bundles in the engine oil cooler with a 3.18 mm (.125 in.) diameter rod.
6. Remove bolts (9). Remove clamp (8) and elbow (7).
7. Remove four bolts (10). Remove bonnet (11).
Install Oil Cooler (Industrial Engine)
1. Put bonnet (1) in position. Install bolts (4).
2. Install elbow (2) and clamp (3).
3. Put clean engine oil or glycerine on the O-ring seals for the adapter. Install the O-ring seals on the adapter.
4. Install adapter (8) and bonnet (6) on oil cooler (7).
5. Put the oil cooler into position. Install the spacer and gasket between bonnet (6) and cylinder block (5). Install the bolts that hold bonnet (6) to the cylinder block.
6. Install bracket (10) that holds the oil level gauge.
7. Install breather tube (9).
END BY:
a. install oil filter base