C13, C15, and C18 Tier 4 Final Engines Caterpillar


Flywheel

Usage:

826K 232


图 1g02555376

注:

表 1
154-6189 飞轮总成的技术规格 
项目  数量  零件  技术规格说明 
12  5B-0841 螺栓  组装前,在螺纹上涂抹发动机机油、二硫化钼或石墨基润滑剂。 
拧紧至扭矩为 270 ± 40 N·m (200 ± 30 lb ft)
注:请参阅系统操作、测试与调整, "飞轮跳动"以了解检查飞轮的正确方法。 

Caterpillar Information System:

C9.3 Tier 4 Final Engines Exhaust Diffuser Adapter
C13, C15, and C18 Tier 4 Final Engines Flywheel
2011/05/23 The Heater Control Panel Has Been Improved {7320}
2011/05/20 An Improved Crankcase Guard Gp Is Now Used {7151}
924K, 930K, 938K, 950G II, 950H, 950K, 950L, 950M, 950M Z, 962G II, 962H, 962K, 962L, 962M, 962M Z, 966G II, 966H, 966K, 966L, 966M, 966M XE, 972G II, 972H, 972K, 972L, 972M, 972M XE, 980G II, 980H, 980K, 980L, 980M and 982M Wheel Loaders Automatic L Automatic Lubrication System Troubleshooting
992K Wheel Loader and 854K Wheel Dozer Braking System Foot Brake Control - Foot Brake Base (Right Hand Pedal)
924K, 930K, 938K, 950G II, 950H, 950K, 950L, 950M, 950M Z, 962G II, 962H, 962K, 962L, 962M, 962M Z, 966G II, 966H, 966K, 966L, 966M, 966M XE, 972G II, 972H, 972K, 972L, 972M, 972M XE, 980G II, 980H, 980K, 980L, 980M and 982M Wheel Loaders Automatic L Automatic Lubrication System - Adjust
Adapting 140M and 160M Snow Wings to 140M Series 2 and 160M Series 2 Motor Graders{6158, 6159} Adapting 140M and 160M Snow Wings to 140M Series 2 and 160M Series 2 Motor Graders{6158, 6159}
2011/05/16 Improved Messenger Software is Now Available on Certain 770 and 772 Off Highway Trucks {7620}
2011/05/26 Fuel Filter Has Changed on Certain Multi Terrain Loaders, Skid Steer Loaders, and Compact Track Loaders {1258, 1261, 1263}
SC-57 Felling Head Felling Head General Information
986H Wheel Loader Machine Systems Speed Sensor (Transmission Output)
C13, C15, and C18 Tier 4 Final Engines Flywheel
AP1055E and BG1055E Asphalt Pavers Machine Systems Piston Pump Neutral (Auger Conveyor and Drag Conveyor) - Test and Adjust
2011/05/12 Improved Wearstrip Retention for the Moldboard on Certain 14M and 16M Series Motor Graders {6152, 6154, 6155}
Blow-by from Crankcase Breather for C2.2, C3.3, C4.4, C6.6, C7.1 (Mechanical), and C7.1 Engines {1000, 1074, 1107, 1317} Blow-by from Crankcase Breather for C2.2, C3.3, C4.4, C6.6, C7.1 (Mechanical), and C7.1 Engines {1000, 1074, 1107, 1317}
C13, C15, and C18 Tier 4 Final Engines Flywheel
541 Series 2 Track Feller Buncher and 552 Series 2 Track Feller Buncher Machine Systems Pilot Hydraulic System
2014/10/20 An Improved Rear Access Walkway Group is Now Used on Certain 793F Off-Highway Trucks {7255}
Cat® Terrain for Draglines Setup and Configuration Guide General Information
Cat® Terrain for Draglines Setup and Configuration Guide Software Upgrade
Cat® Terrain for Draglines Setup and Configuration Guide Initial Setup
SH-56B Felling Head Felling Head Disc Saw Tooth
Cat® Terrain for Draglines Setup and Configuration Guide Configuration
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.