Lifting and Tying Down the Machine
Show/hide table
Illustration 1 | g02757196 |
Show/hide table
NOTICE |
---|
Improper lifting or tie-downs can allow the load to shift and cause injury or damage. |
Show/hide table
Proper lifting points are marked on the machine by this decal. |
Show/hide table
Proper tie-down points are marked on the machine by this decal. |
ReferenceRefer to Operation and Maintenance Manual, "Specifications" for the dimensions of the machine.
Note: Weights may vary with different work tools.
- For lifting objects, use properly rated cables and properly rated slings. Position the crane for a level machine lift.
- Spreader bar widths should be sufficient for preventing contact with the machine.
- Two rear holes and two front holes are provided for tie-downs. Use these holes.
Install the tie-downs at several locations. Install the tie-downs for the backhoe and for the bucket. Place blocks under the front wheels and under the rear wheels.
Check the appropriate laws that govern the weight of the load. Check the appropriate laws that govern the width of the load and the length of the load.
Consult your Caterpillar dealer for shipping instructions for your machine.
Caterpillar Information System:
AP1000E and BG1000E Asphalt Pavers Machine Systems Control Valve (Auxiliary) - Install
2011/03/09 Brake Guard Groups are Available on Certain M Series Motor Graders {7166}
2011/07/07 A New Serpentine Belt and Belt Tensioner Are Now Used on 777F Off-Highway Trucks {1357, 1358, 1397}
450F Backhoe Loader Lubricant Viscosities - Fluids Recommendations
2011/08/29 The Toggle Switch Has Been Relocated to the Frame Assembly of the 770 and 772 Off-Highway Trucks {1258, 1260, 1261, 7332}
422F, 428F, 432F, 434F and 444F Backhoe Loaders Battery Disconnect
C7.1 Engines For Caterpillar Built Machines Indicator Lamp Circuit - Test
C7.1 Engines For Caterpillar Built Machines Ignition Keyswitch Circuit and Battery Supply Circuit - Test
C7.1 Engines For Caterpillar Built Machines Glow Plug Starting Aid - Test
735B and 740B Articulated Trucks Cooling System Pressure Cap - Clean/Replace
2011/04/22 Improved Fender Groups are now Used on 770, and 772 Off-Highway Trucks {7252}
2011/04/22 A new Special Instruction is Available for Replacing the Platform Assemblies on the 770 and 772 Off-Highway Trucks {1408, 1417, 1429, 7051, 7155, 7156, 7251, 7254, 7256, 7263, 7267, 7405, 7557}
2011/03/29 A New Hose Clamp Is Now used on Certain Machine Engines {1361, 1380, 7553}
2011/03/22 A New Hose Clamp Is Now used on Certain Engines {1361, 1380, 7553}
450F Backhoe Loader Monitoring System
HH44 DE Harvester Head Safety Messages
HH44 DE Harvester Head Piston Motor (Feed Roller) - Assemble
Air Conditioning and Heating R134a for All Caterpillar Machines Refrigerant Compressor
C3.4B Industrial Engine Burn Prevention
AP1000E and BG1000E Asphalt Pavers Machine Systems Control Valve (Apron) - Remove
AP1000E and BG1000E Asphalt Pavers Machine Systems Control Valve (Apron) - Install
450F Backhoe Loader Fumes Disposal Filter Element - Replace - Open Crankcase Ventilation (OCV) Filter
HH44 DE Harvester Head Specifications
2011/04/15 Updated Hose Material Improves Service Life of the Hose Assemblies on 793D and 797B Off-Highway Trucks {1380}