Control Valve (Auxiliary) - Install
安装步骤
- 由于控制阀的位置,可能需要由两个人一起安装控制阀 (2) 。 控制阀 (2) 的重量约为 16 kg (35 lb)。
Show/hide table
图 1 | g02460362 |
- 安装控制阀 (2) 、支架 (13) 和螺栓 (12) 。
- 将软管组件 (11) 连接到控制阀 (2) 上。
Show/hide table
图 2 | g02460361 |
- 将软管组件 (10) 、 (8) 和 (9) 连接到控制阀 (2) 上。
Show/hide table
图 3 | g02460360 |
- 将线束组件 (7) 放置到位。 将线束组件 (7) 连接到电磁阀上。 安装电缆扎带。
Show/hide table
图 4 | g02460359 |
- 将软管组件 (6) 连接到控制阀 (2) 和制动泵 (5) 上。
Show/hide table
图 5 | g02460358 |
- 将软管组件 (4) 、 (3) 和 (1) 连接到控制阀 (2) 。
Show/hide table
图 6 | g02460357 |
- 用液压油加注液压油箱。 有关正确的步骤,请参阅操作和保养手册。
- 将蓄电池断路开关转至接通位置。 关闭左侧检修面板。
Caterpillar Information System:
2011/03/09 Brake Guard Groups are Available on Certain M Series Motor Graders {7166}
2011/07/07 A New Serpentine Belt and Belt Tensioner Are Now Used on 777F Off-Highway Trucks {1357, 1358, 1397}
450F Backhoe Loader Lubricant Viscosities - Fluids Recommendations
2011/08/29 The Toggle Switch Has Been Relocated to the Frame Assembly of the 770 and 772 Off-Highway Trucks {1258, 1260, 1261, 7332}
422F, 428F, 432F, 434F and 444F Backhoe Loaders Battery Disconnect
C7.1 Engines For Caterpillar Built Machines Indicator Lamp Circuit - Test
C7.1 Engines For Caterpillar Built Machines Ignition Keyswitch Circuit and Battery Supply Circuit - Test
C7.1 Engines For Caterpillar Built Machines Glow Plug Starting Aid - Test
735B and 740B Articulated Trucks Cooling System Pressure Cap - Clean/Replace
2011/04/22 Improved Fender Groups are now Used on 770, and 772 Off-Highway Trucks {7252}
2011/04/22 A new Special Instruction is Available for Replacing the Platform Assemblies on the 770 and 772 Off-Highway Trucks {1408, 1417, 1429, 7051, 7155, 7156, 7251, 7254, 7256, 7263, 7267, 7405, 7557}
Field Procedure to Install new Platform Assemblies on the 770 and 772 Off-Highway Trucks{1408, 1417, 1429, 7051, 7155, 7156, 7251, 7253, 7254, 7256, 7267, 7405, 7557} Field Procedure to Install new Platform Assemblies on the 770 and 772 Off-Highway Trucks{1408, 1417, 1429, 7051, 7155, 7156, 7251, 7253, 7254, 7256, 7267, 7405, 7557}
416F, 420F and 430F Backhoe Loaders Lifting and Tying Down the Machine
2011/03/29 A New Hose Clamp Is Now used on Certain Machine Engines {1361, 1380, 7553}
2011/03/22 A New Hose Clamp Is Now used on Certain Engines {1361, 1380, 7553}
450F Backhoe Loader Monitoring System
HH44 DE Harvester Head Safety Messages
HH44 DE Harvester Head Piston Motor (Feed Roller) - Assemble
Air Conditioning and Heating R134a for All Caterpillar Machines Refrigerant Compressor
C3.4B Industrial Engine Burn Prevention
AP1000E and BG1000E Asphalt Pavers Machine Systems Control Valve (Apron) - Remove
AP1000E and BG1000E Asphalt Pavers Machine Systems Control Valve (Apron) - Install
450F Backhoe Loader Fumes Disposal Filter Element - Replace - Open Crankcase Ventilation (OCV) Filter
HH44 DE Harvester Head Specifications