HH44 DE Harvester Head Caterpillar


Safety Messages

Usage:

HH44 DE RMB
There are several specific safety messages on this work tool. The exact location of the safety messages and the description of the safety messages are reviewed in this section. Please become familiarized with all safety messages.

Make sure that all of the safety messages are legible. Clean the safety messages or replace the safety messages if you cannot read the words. Replace the safety messages if the illustrations are not legible. When you clean the safety messages, use a cloth, water, and soap. Do not use solvent, gasoline, or other harsh chemicals to clean the safety messages. Solvents, gasoline, or harsh chemicals could loosen the adhesive that secures the safety message. Loose adhesive will allow the safety message to fall.

Replace any safety message that is damaged, or missing. If a safety message is attached to a part that is replaced, install a safety message on the replacement part. Any Cat dealer can provide new safety messages.




Illustration 1g02456981

Do Not Operate (1)

This warning message is located on the inside surface of the right cab window.



g01370904

------ WARNING! ------

Do not operate or work on this equipment unless you have read and understand the instructions and warnings in the Operation and Maintenance Manual. Failure to follow the instructions or heed the warnings could result in injury or death. Contact any Caterpillar dealer for replacement manuals. Proper care is your responsibility.

----------------------

Flying Debris (2)

This danger message is located in the middle of the frame on both sides of the harvester head.



g02631677

------ DANGER! ------

The operation of the machine can cause debris to fly. Stay clear of rotating blades and moving parts during machine operation. Stop the rotation of the cutting gear before approaching the machine. The flying debris, moving parts and/or rotating blades can cause serious injury or death.


Cutting Hazard (3)

This warning message is located in the middle of the frame on both sides of the harvester head.



g02533878

------ WARNING! ------

Hand cutting hazard from saw blade. Could cause serious injury or death.

Keep hands away from this area when blade movement is possible.

----------------------

Pressurized Oil (4)

This warning message is located on the accumulator bracket under the cover on the back of the harvester head.



g01683257

------ WARNING! ------

Personal injury can result from sudden release of high pressure oil. Do not check for leaks with your hands. A pinhole leak can penetrate the skin and cause serious injury or possible death. Always use a board or cardboard when checking for leaks. Release the pressure from the system before disconnecting oil lines. Read and understand the Operation and Maintenance Manual before performing any hydraulic system maintenance.

----------------------

Caterpillar Information System:

450F Backhoe Loader Monitoring System
2011/03/22 A New Hose Clamp Is Now used on Certain Engines {1361, 1380, 7553}
2011/03/29 A New Hose Clamp Is Now used on Certain Machine Engines {1361, 1380, 7553}
416F, 420F and 430F Backhoe Loaders Lifting and Tying Down the Machine
AP1000E and BG1000E Asphalt Pavers Machine Systems Control Valve (Auxiliary) - Install
2011/03/09 Brake Guard Groups are Available on Certain M Series Motor Graders {7166}
2011/07/07 A New Serpentine Belt and Belt Tensioner Are Now Used on 777F Off-Highway Trucks {1357, 1358, 1397}
450F Backhoe Loader Lubricant Viscosities - Fluids Recommendations
2011/08/29 The Toggle Switch Has Been Relocated to the Frame Assembly of the 770 and 772 Off-Highway Trucks {1258, 1260, 1261, 7332}
422F, 428F, 432F, 434F and 444F Backhoe Loaders Battery Disconnect
C7.1 Engines For Caterpillar Built Machines Indicator Lamp Circuit - Test
C7.1 Engines For Caterpillar Built Machines Ignition Keyswitch Circuit and Battery Supply Circuit - Test
HH44 DE Harvester Head Piston Motor (Feed Roller) - Assemble
Air Conditioning and Heating R134a for All Caterpillar Machines Refrigerant Compressor
C3.4B Industrial Engine Burn Prevention
AP1000E and BG1000E Asphalt Pavers Machine Systems Control Valve (Apron) - Remove
AP1000E and BG1000E Asphalt Pavers Machine Systems Control Valve (Apron) - Install
450F Backhoe Loader Fumes Disposal Filter Element - Replace - Open Crankcase Ventilation (OCV) Filter
HH44 DE Harvester Head Specifications
2011/04/15 Updated Hose Material Improves Service Life of the Hose Assemblies on 793D and 797B Off-Highway Trucks {1380}
730 EJ Articulated Truck Ejector Blade Alignment - Check/Adjust
C6.6 Industrial Engine Exhaust Manifold and Turbocharger - Install
C6.6 Industrial Engine Exhaust Manifold and Turbocharger - Remove
416F, 420F and 430F Backhoe Loaders Fuses - Replace
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.