994H Wheel Loader Power Train Caterpillar


Selector and Pressure Control Valve (Transmission)

Usage:

994H DWC


Illustration 1g06250309

Table 1
Item  Qty  Part  Specification description 
118-0287 Spring  Length under test force is 22.15 mm (0.872 inch).
Test force is 93.40 ± 4.67 N (21.00 ± 1.05 lb).
Free length after test is 33.73 mm (1.328 inch)
9P-3041 Spring  Length under test force 1 is 110.0 mm (4.33 inch).
Test force 1 is 72.6 ± 3.6 N (16.3 ± 0.8 lb).
Length under test force 2 is 85.5 mm (3.37 inch).
Test force 2 is 240.3 ± 7.2 N (54.0 ± 1.6 lb).
Free length after test is 117.40 mm (4.622 inch)
7G-4842 Spring  Length under test force 1 is 62.5 mm (2.46 inch).
Test force 1 is 32.3 ± 1.6 N (7.3 ± 0.4 lb).
Length under test force 2 is 36.3 mm (1.43 inch).
Test force 2 is 142.3 ± 4.3 N (32.0 ± 1.0 lb).
Free length after test is 68.45 mm (2.695 inch)
6I-9519 Spring  Length under test force is 31.3 mm (1.23 inch).
Test force is 64.5 ± 3.2 N (14.5 ± 0.7 lb).
Free length after test is 47.18 mm (1.857 inch)
As required, use the following spacers: 
1 5M-9622 Spacer  Thickness is 1.60 mm (0.063 inch)
1 5M-9623 Spacer  Thickness is 0.9 mm (0.04 inch)
3 5M-9624 Spacer  Thickness is 0.25 mm (0.010 inch)
6P-9785 Spring  Length under test force is 19.48 mm (0.767 inch).
Test force is 23.5 ± 1.2 N (5.3 ± 0.3 lb).
Free length after test is 32.00 mm (1.260 inch)
4M-2381 Spring  Length under test force is 12.2 mm (0.48 inch).
Test force is 2.30 ± 0.18 N (0.52 ± 0.04 lb).
Free length after test is 22.6 mm (0.89 inch)
6P-4978 Spring  Length under test force is 27.15 mm (1.069 inch).
Test force is 67.3 ± 3.4 N (15.1 ± 0.8 lb).
Free length after test is 38.10 mm (1.500 inch)
6P-9783 Spring  Length under test force is 56.39 mm (2.220 inch).
Test force is 62.0 ± 3.1 N (13.9 ± 0.7 lb).
Free length after test is 88.60 mm (3.488 inch)
10  6P-9784 Spring  Length under test force is 56.39 mm (2.220 inch).
Test force is 130.4 ± 6.5 N (29.3 ± 1.5 lb).
Free length after test is 88.60 mm (3.488 inch)

Caterpillar Information System:

521B and 522B Track Feller Bunchers Machine Systems Travel Motor
2011/08/10 New Line Relief Valves are Now Used for Certain Excavators and Mobile Hydraulic Power Units {5069, 5117}
994H Wheel Loader Power Train Transmission Control Valve
Cat® Grade Control Cross Slope for Motor Graders Module - Replace
Cat® Grade Control Cross Slope for Motor Graders Wiring Harness (Short Circuit) - Test
Cat® Grade Control Cross Slope for Motor Graders Wiring Harness (Open Circuit) - Test
Cat® Grade Control Cross Slope for Motor Graders Electrical Connector - Inspect
770G and 772G Off-Highway Truck Machine Systems Steering Column - Assemble
770G and 772G Off-Highway Truck Machine Systems Steering Column - Disassemble
SC-57 Felling Head Felling Head Output Shaft - Install
2011/04/06 Additional Shims Are Now Used In the Truck Body Mounting Group on 777F Off-Highway Trucks {7258}
2011/05/12 A New Air Conditioning Compressor Protection Module Is Now Used for Certain Cat Products {1408}
770G and 772G Off-Highway Truck Hydraulic Fan Drive System Oil Filter (Case Drain)
770G and 772G Off-Highway Truck Hydraulic Fan Drive System Oil Filter (Hydraulic Fan)
2011/02/02 New Advanced Efficiency Filters Are Now Available for the Transmission Assembly and the Torque Converter Assembly Used on Certain Wheel Loaders {1408, 1435, 3004, 3006, 3067, 5068}
770G and 772G Off-Highway Truck Suspension Cylinder Rear Suspension (Cylinder)
770G and 772G Off-Highway Truck Hydraulic and Braking System Hydraulic Tank (Brake, Brake Cooling, Hoist)
Installation of the v3.2.3 Software for CAES{7604, 7620} Installation of the v3.2.3 Software for CAES{7604, 7620}
R1300G Load Haul Dump Maintenance Interval Schedule
770G and 772G OEM Off-Highway Truck General Information
2011/01/31 A New Retainer Ring is Available for the All Wheel Drive Motors on Certain M Series Motor Graders {4351, 4351}
770G and 772G OEM Off-Highway Truck Machine Electronic Control Module (Chassis)
Landfill Compactors, Soil Compactors, Wheel Dozers, and Wheel Loaders VIMSTM 3G Display Module - Replace
770G and 772G OEM Off-Highway Truck Transmission Control
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.