G3306 TRUCK ENGINE Caterpillar


Carburetor Control Group

Usage:


Left Side View (View A-A rotated 85 degrees CW)


Area A-Carburetor End Area B-Governor Actuator End

(1) Carburetor.

(2) Governor Linkage Nut. Tighten ... 13 ± 3 N·m (10 ± 2 lb ft)

(3) Air/Fuel control.

(4) Deceleration fuel cutoff valve.

(5) Governor actuator.

(6) throttle assembly shaft vertical.

(7) Maximum throttle position.

(8) Shutoff position.

(9) Shutoff position.

(10) Governor actuator stop position.

(11) Actuator shaft horizontal.

(12) Rotation angle between governor actuator stop position (10) and actuator shaft horizontal (11) ... 10 degrees

(13) Rotation angle between shutoff position (9) and actuator shaft horizontal (11) ... 12.5 ± 5.0 degrees

(14) Rotation angle between maximum throttle position (7) and throttle assembly shaft vertical (6) ... 5 degrees

(15) Rotation angle between throttle assembly shaft vertical (6) and shutoff position (8) ... 80 degrees

(16) Rotation angle between maximum throttle position (17) and actuator shaft horizontal (11) ... 81 degrees

(17) Maximum throttle position.

Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.