Usage:
110-6464 Shutoff Solenoid:
Voltage rating ... 12V
Coil resistance at 25°C (77°F) ... 1.33 ± 0.07 ohms
110-6465 Shutoff Solenoid:
Voltage rating ... 24V
Coil resistance at 25°C (77°F) ... 5.12 ± 0.26 ohms
NOTE: Duty-intermittent, 70 seconds max. "ON".
8C9986 Shutoff Solenoid:
Voltage rating ... 12V
Pull-in coil resistance at 25°C (77°F) ... 0.28 ± 0.03 ohms
Hold-in coil resistance at 25°C (77°F) ... 12 ± 1.2 ohms
NOTE: Tighten terminal nuts to a torque ... 1.70 ± 0.25 N·m (15.044 ± 2.212 lb in)
8C6099 Shutoff Solenoid
Voltage rating ... 24 or 32V
Coil resistance at 25°C (77°F) ... 3.3 to 4.1 ohms
Energized to ... shutoff
| NOTICE |
|---|
This solenoid must not be used in constant operation for more than 2.5 minutes or damage may result. |
(1) Torque for terminal nuts ... 1.23 to 1.92 N·m (11 to 17 lb in)
(2) Distance from end of solenoid to end of plunger ... 11.3 mm (.44 in)
(3) Tighten locknut to a torque of ... 24 ± 7 N·m (18 ± 5 lb ft)
(4) Distance of plunger travel [start with dimension (2)] ... 15.9 mm (.63 in)
7N9845 Spring:
Length under test force ... 31.09 mm (1.22 in)
Test force ... 16.68 ± 1.33 N (3.75 ± .30 lb)
Free length after test ... 78.75 mm (3.10 in)
Outside diameter ... 44.45 mm (1.750 in)
(6) Distance from shaft shoulder to plunger plate ... 50.0 mm (1.97 in)