Usage:
(1) Width of groove in camshaft for the thrust washer (new) ... 4.83 ± 0.05 mm (0.190 ± 0.002 in)
Thickness of thrust washer (new) ... 4.65 ± 0.03 mm (0.183 ± 0.001 in)
End play of the camshaft (new) ... 0.10 to 0.26 mm (.004 to 0.010 in))
Maximum permissible end play (worn) ... 0.64 mm (.025 in)
(2) Diameter of camshaft journals (new) ... 58.699 ± 0.013 mm (2.3110 ± .0005 in)
Typical Illustration
(3) Camshaft lobe lift.
(4) Height of camshaft lobes.
To find lobe height, use the procedure that follows:
A. Measure camshaft lobe height (4).
B. Measure base circle (5).
C. Subtract base circle (STEP B) from lobe height (STEP A). The difference is actual lobe lift.
D. Specified camshaft lobe lift (3) is:
105-4613 Camshaft Group
Exhaust lobe ... 8.250 mm (0.3248 in)
Intake lobe ... 5.349 mm (0.2106 in)
106-3196 Camshaft Group
Exhaust lobe ... 8.250 mm (0.3248 in)
Intake lobe ... 6.500 mm (0.2559 in)