Improper Torqued Connector on the 0R-1015 Water Pump Gp for Certain 3116 and 3126B Engines{1361}
- Engine:
- 3116 (S/N: 2WG1-UP; 1NJ1-UP; 7HJ1-UP)
- 3126B (S/N: BES1-UP)
Introduction
The problem that is identified below does not have a known permanent solution. Until a permanent solution is known, use the solution that is identified below.
Problem
Show/hide table
Illustration 1 | g02328836 |
0R-1015 Water Pump Gp (1) 3R-6790 Port Connector |
The 3R-6790 Port Connector located on the 0R-1015 Water Pump Gp has been improperly torqued at the factory.
Solution
When installing a new 0R-1015 Water Pump Gp , ensure that the 3R-6790 Port Connector is torqued to specification.
Torque for the 3R-6790 Port Connector ... 140 + 14 N·m (103 + 10 lb ft)
Caterpillar Information System:
2010/11/18 Stiffer Cab Mountings Available for Certain Backhoe Loader Machines {7301}
C15 and C18 Tier 4 Final Engines Fuel System Pressure - Test
770G and 772G Off-Highway Truck Towing With Power Train Failure
770G and 772G Off-Highway Truck Towing With Inoperable Engine
777G Off-Highway Truck Hydraulic and Braking System Towing the Machine - Preparation
770G and 772G Off-Highway Truck Sound Suppression - Remove and Install - Engine Enclosure
777G Off-Highway Truck Hydraulic and Braking System Relief Valve (Brake Oil Cooler) - Test and Adjust
770G and 772G Off-Highway Truck Guard (Engine Oil Pan) - Remove and Install
C13 Tier 4 Final Engines Fuel Pressure Sensor
777G Off-Highway Truck Hydraulic and Braking System Relief Valve (Hoist Raise, Hoist Lower) - Test and Adjust
777G Off-Highway Truck Hydraulic and Braking System Gear Pump (Brake, Brake Cooling, Hoist) - Purge
777G Off-Highway Truck Hydraulic and Braking System Hoist Control - Adjust
120M Series 2, 12M Series 2, 140M Series 2 and 160M Series 2 Motor Graders Fuel Tank Water and Sediment - Drain
120 and 120 AWD Motor Grader Restricted Visibility
Reconditioning Procedure for Seal Ramps on Inverted Style Idler and Roller Shafts {0729, 4150, 4154, 4159, 6433, 7561} Reconditioning Procedure for Seal Ramps on Inverted Style Idler and Roller Shafts {0729, 4150, 4154, 4159, 6433, 7561}
16M Series 3 and 18M Series 3 Motor Graders Stopping the Machine
770G and 772G Off-Highway Truck Engine Starting with Jump Start Cables
2010/12/16 A New Exhaust Plug Is Used on Certain C18 Engines {1058, 1061}
2010/11/08 Improved Housing on Steering Control Group for the 583T Pipelayer {3033}
450E Backhoe Loader Hydraulic and Steering System Accumulator
C15 and C18 Tier 4 Final Engines Water Temperature Regulator - Test
587T Pipelayer Hydraulic System Location of Components (Fan System)
3406C Industrial Engine Reference Information
770G and 772G Off-Highway Truck Engine Starting with Auxiliary Start Receptacle