Usage:
1. Put identification marks on all electrical wires connected to the electric starting motor for installation purposes.
2. Remove three mounting bolts (2). Use two people to remove electric starting motor (1) from the flywheel housing. The weight of the electric starting motor is approximately 29 kg (65 lb).
NOTE: The following steps are for the installation of the electric starting motor.
3. Check the condition of the gasket used between the electric starting motor and the flywheel housing. If the gasket is worn or damaged, use a new part for replacement.
4. Install the gasket on the electric starting motor.
5. Use two people to put electric starting motor (1) in position in the flywheel housing, and install three bolts (2) that hold it.
6. Connect all electrical wires to the electric starting motor in their original locations.