Junction Box
Usage:
Remove & Install Junction Box
1. Open the lid to junction box (2).
2. Mark for identification, all wires, cables and electrical connectors inside junction box (2) for later installation purposes.
3. Disconnect all wires, cables and electrical connectors inside junction box (2).
4. Remove nut (1).
5. Pull the wiring harness through the opening in the junction box.
6. Mark for identification all wires on wiring harness (7).
7. Disconnect wiring harness (7).
8. Remove two bolts (5) and washers.
9. Remove two bolts (6) and washers.
10. Remove junction box (2), bracket (3) and volt meter (4) as a unit.
NOTE: For installation of the junction box, reverse the removal steps.
Caterpillar Information System:
3176B MARINE ENGINE Personality Module (PM)
3176B MARINE ENGINE Electronic Control Module (ECM)
3176B MARINE ENGINE Air Cleaner
3176B MARINE ENGINE Testing And Adjusting
3176B MARINE ENGINE Systems Operation
3176B MARINE ENGINE Starting Solenoid
3176B MARINE ENGINE Electric Starter Motor
3176B MARINE ENGINE Regulators
3176B MARINE ENGINE Alternators
3176B MARINE ENGINE Belt Tension Chart
3176B MARINE ENGINE Damper Group
3176B MARINE ENGINE Air Cleaner Group
3176B MARINE ENGINE Electric Starting Motor
3176B MARINE ENGINE V-Belt
3176B MARINE ENGINE Alternator
3176B MARINE ENGINE Aftercooler (Sea Water)
3176B MARINE ENGINE Oil Filter & Oil Filter Base Assembly
3176B MARINE ENGINE Oil Cooler
3176B MARINE ENGINE Liquid Level Sensor
3176B MARINE ENGINE Heat Exchanger (Sea Water)
3176B MARINE ENGINE Water Pump
3176B MARINE ENGINE Auxiliary Pump (Sea Water)
3176B MARINE ENGINE Engine Oil Pump
3176B MARINE ENGINE Fuel Priming Pump