Electronic Control Module (ECM)
Usage:
Remove & Install Electronic Control Module (ECM)
1. Disconnect fuel lines (1) and (4) from the electronic control module. Cap and plug immediately.
2. Remove two allen head screws (3). Disconnect two electrical connectors (2).
3. Remove ground wire (5). Remove four bolts (7). Remove electronic control module (6).
4. Drain the fuel from the electronic control module into a suitable container for storage or disposal.
NOTE: Install the electronic control module in the reverse order of removal.
NOTE: For information regarding the disassembly and assembly of the Electronic Control Module, see the "Electronic Troubleshooting" module, Form No. SENR6500.
Caterpillar Information System:
3176B MARINE ENGINE Air Cleaner
3176B MARINE ENGINE Testing And Adjusting
3176B MARINE ENGINE Systems Operation
3176B MARINE ENGINE Starting Solenoid
3176B MARINE ENGINE Electric Starter Motor
3176B MARINE ENGINE Regulators
3176B MARINE ENGINE Alternators
3176B MARINE ENGINE Belt Tension Chart
3176B MARINE ENGINE Damper Group
3176B MARINE ENGINE Air Cleaner Group
3176B MARINE ENGINE Flywheel Group
3176B MARINE ENGINE Rotary Position Sensor
3176B MARINE ENGINE Personality Module (PM)
3176B MARINE ENGINE Junction Box
3176B MARINE ENGINE Electric Starting Motor
3176B MARINE ENGINE V-Belt
3176B MARINE ENGINE Alternator
3176B MARINE ENGINE Aftercooler (Sea Water)
3176B MARINE ENGINE Oil Filter & Oil Filter Base Assembly
3176B MARINE ENGINE Oil Cooler
3176B MARINE ENGINE Liquid Level Sensor
3176B MARINE ENGINE Heat Exchanger (Sea Water)
3176B MARINE ENGINE Water Pump
3176B MARINE ENGINE Auxiliary Pump (Sea Water)