3400 ELECTRONIC MARINE ENGINES Caterpillar

Connecting the PORT and STBD Throttle With Engine Synchronization

Usage:

Connecting the PORT and STBD Primary and Secondary Throttle Inputs Synchronization System

STBD:

1. Connect PIN C of the STBD throttle position sensor to PIN 1 of the STBD terminal strip.

2. Connect PIN 2 of the STBD terminal strip to PIN 3 of the PORT P2 (DT) connector.

3. Connect PIN 3 of the STBD terminal strip to PIN 4 of the STBD P2 (DT) connector.

4. Connect PIN 5 of the STBD P2 (DT) connector to PIN A of the STBD TPS.

5. Connect PIN 6 of the STBD P2 (DT) connector to PIN B of the STBD TPS.

PORT:

1. Connect PIN C of the PORT throttle position sensor to PIN 1 of the PORT terminal strip.

2. Connect PIN 2 of the PORT terminal strip to PIN 3 of the STBD P2 (DT) connector.

3. Connect PIN 3 of the PORT terminal strip to PIN 4 of the PORT P2 (DT) connector.

4. Connect PIN 5 of the PORT P2 (DT) connector to PIN A of the PORT TPS.

5. Connect PIN 6 of the PORT P2 (DT) connector to PIN B of the PORT TPS.

Connecting the Synchronization Switch

1. Connect PIN 1 of the STBD P2 connector to PIN 2 of the synchronization switch.

2. Connect PIN 2 of the PORT P2 connector to PIN 2 of the synchronization switch.

3. Connect PIN 2 of the STBD P2 connector to PIN 5 of the synchronization switch.

4. Connect PIN 1 of the PORT P2 connector to PIN 5 of the synchronization switch.

Caterpillar Information System:

3400 ELECTRONIC MARINE ENGINES Connecting the PORT and STBD Throttle Without Engine Synchronization

3400 ELECTRONIC MARINE ENGINES Throttle and Engine Synchronization System

3400 ELECTRONIC MARINE ENGINES 3408 and 3412 High Performance Marine Engine Electronic Control System

G3408 & G3412 ENGINES Testing & Adjusting

G3408 & G3412 ENGINES Systems Operation

ELECTRONIC MODULAR CONTROL PANEL II+ (EMCPII+) FOR MUI ENGIN Testing And Adjusting

ELECTRONIC MODULAR CONTROL PANEL II+ (EMCPII+) FOR MUI ENGIN Systems Operation

VR3F VOLTAGE GENERATOR PERMANENT MAGNET EXCITED SR4 GENERATO Voltage Droop Transformer And Adjustment Rheostat For Parallel Operation

VR3F VOLTAGE GENERATOR PERMANENT MAGNET EXCITED SR4 GENERATO Manual Voltage Control

VR3F VOLTAGE GENERATOR PERMANENT MAGNET EXCITED SR4 GENERATO Remote Voltage Control

VR3F VOLTAGE GENERATOR PERMANENT MAGNET EXCITED SR4 GENERATO Bench Test

VR3F VOLTAGE GENERATOR PERMANENT MAGNET EXCITED SR4 GENERATO Problem 4 - Unstable AC Voltage

3400 ELECTRONIC MARINE ENGINES Trolling Mode

3400 ELECTRONIC MARINE ENGINES Connecting the Diagnostic Connector P3 (DT)

3400 ELECTRONIC MARINE ENGINES Connecting the Transmission Sensors Connector J15 (HD)

3400 ELECTRONIC MARINE ENGINES Optional Computerized Monitoring System (CMS)

3400 ELECTRONIC MARINE ENGINES Connecting the Optional CMS Horn Output

3400 ELECTRONIC MARINE ENGINES Connecting Multiple CMS Displays

3400 ELECTRONIC MARINE ENGINES Connecting the Engine Shutdown Input

3400 ELECTRONIC MARINE ENGINES Installing the RUN/SHUTDOWN Light

3400 ELECTRONIC MARINE ENGINES Relocating the Electronic Control Module (ECM)

3400 ELECTRONIC MARINE ENGINES Electrical System Grounding Requirements

3400 ELECTRONIC MARINE ENGINES Raw Water Connections

3400 ELECTRONIC MARINE ENGINES Priming the Gilkes Sea Water Pump