Pressure Sensor (Brake Oil Accumulator)
Show/hide table
| |
| Illustration 1 | g03395713 |
Show/hide table
| Specification for 221-3405 Pressure Sensor Gp | |||
| Item | Qty | Part | Specification Description |
| 1 | 1 | 221-3405 Pressure Sensor Gp | Final installation torque is |
| - | - | - | Voltage supply is 8 to 32 VDC. |
| - | - | - | Output frequency is 500 ± 100 Hz. |
| - | - | - | Duty cycle is 10.6 to 94.2 %. |
Caterpillar Information System:
793F and 793F CMD Off-Highway Truck Braking System Pressure Sensor (Traction Control)
C9.3 Engines for Caterpillar Built Machines Crankcase Pressure Sensor - Remove and Install
793F and 793F CMD Off-Highway Truck Braking System Hydraulic Tank Mounting
950H Wheel Loader, 962H Wheel Loader and IT62H Integrated Toolcarrier Electrohydraulic System Tilt Cylinder
980H Wheel Loader Machine Systems Lubrication Pump (Automatic) - Install
980H Wheel Loader Machine Systems Lubrication Pump (Automatic) - Remove
422E, 428E, 432E, 434E, 442E and 444E Backhoe Loaders Capacities (Refill)
M325D L MH and M325D MH Material Handlers Hydraulic System Transmission (Shift Pressure) - Test
789D, 793F, and 797F Off-Highway Truck Monitoring System MID 053 - CID 0533 - FMI 02
C15 and C18 Petroleum Generator Sets Decommissioning and Disposal
789D, 793F, and 797F Off-Highway Truck Monitoring System MID 053 - CID 0800 - FMI 02
422E, 428E, 432E, 434E, 442E and 444E Backhoe Loaders Lift Cylinder Brace - Connect and Disconnect
584 and 584HD Forwarders Hydraulic System Accumulator - Test and Charge
M325D L MH and M325D MH Material Handlers Hydraulic System Accumulator (Wheel Brake Charge Pressure) - Test and Adjust
C13 Tier 4 Final Engines Water Temperature Regulator - Test
793F AC Off-Highway Truck Hydraulic and Braking System Gear Pump (Brake, Hoist)
M325D L MH and M325D MH Material Handlers Hydraulic System Brake Control Valve (Service) - Adjust
C13 Tier 4 Final Engines Water Pump - Test
793F and 793F CMD Off-Highway Truck Braking System Motor Rotating (Brake Cooling)
C9.3 Engines for Caterpillar Built Machines Inlet Manifold Temperature Sensor - Remove and Install
Rework Procedure to Update the Support Mounts for the Radiator {0679, 1350, 1353, 7051, 7051} Rework Procedure to Update the Support Mounts for the Radiator {0679, 1350, 1353, 7051, 7051}
2009/07/27 A Procedure to Update the Radiator is Available {0679, 1350, 1353, 7051, 7051}
MINEGEM Machine Control ; Guidance Products Machine Automation System Data Link
CB-434D and CB-434D XW Vibratory Asphalt Compactor Propel System Solenoid Valve (Brake Interlock)