735, 740 and 740 EJECTOR Articulated Trucks Machine Systems Caterpillar


Brake Control Valve (Service)

Usage:

735 B1N


Illustration 1g01749794
(2) Brake ports
(3) Drain plug
(4) Pressure ports
(5) Tank ports

(A) Approximate pedal travel ... 17 degrees

(B) Pedal force at 177.8 mm (7.00 inch) ... 250 N (56 lb)

(C) Approximate pedal angle ... 65 degrees

(1) Torque for two bolts ... 27.1 ± 2.7 N·m (20 ± 2 lb ft)

Maximum pressure difference between the pressure ports ... 138 kPa (20 psi)

Pressure setting for the brake pressure ports ... 3800 ± 170 kPa (550 ± 25 psi)

Caterpillar Information System:

R2900G Load Haul Dump Cab Air Filter - Clean/Replace - If Equipped
793F and 797F Off-Highway Trucks Chassis Electronic Control System Event Code List
793F and 797F Off-Highway Trucks Chassis Electronic Control System Diagnostic Capabilities
793F and 797F Off-Highway Trucks Chassis Electronic Control System Electrical Component and Connector Locations
793F Series AC Off-Highway Truck Chassis Electronic Control System General Information
793F and 797F Off-Highway Trucks Chassis Electronic Control System Electronic Control Module (ECM) - Configure
2008/12/08 A New Torque Sequence for the Valve Cover Is Now Used {1107}
854K Wheel Dozer and 992K, 993K Wheel Loaders VIMSTM 3G / Product Link Wiring Harness (Short Circuit) - Test
541 Track Feller Buncher, 551 Track Feller Buncher and 552 Track Feller Buncher Machine Systems Relief Valve (Line) - Test and Adjust
854K Wheel Dozer and 992K, 993K Wheel Loaders VIMSTM 3G / Product Link Wiring Harness (Open Circuit) - Test
793F and 797F Off-Highway Trucks Chassis Electronic Control System Electrical Connector - Inspect
Intermittent Erratic Shifting and Derated Engine rpm{1000, 3030, 3101} Intermittent Erratic Shifting and Derated Engine rpm{1000, 3030, 3101}
795F AC and 795F AC XQ Off-Highway Truck Engine Supplement Guard (Engine Oil Pan) - Remove and Install
795F AC and 795F AC XQ Off-Highway Truck Engine Supplement Engine - Remove
795F AC and 795F AC XQ Off-Highway Truck Engine Supplement Engine - Install
Rework for the Implement Gear Pump {5055, 5070, 5073} Rework for the Implement Gear Pump {5055, 5070, 5073}
120K and 120K Series 2 Motor Graders Machine Systems Air Tank - Remove and Install
2008/12/08 Replacement Engines are Available for Legacy Machines {1000}
2009/01/19 A New Seal Kit Is Available for Backhoe Loaders {5051}
2009/04/27 New Updates to Articulated Trucks {1408, 7319, 7348}
120K and 120K Series 2 Motor Graders Power Train Service Brake (Wheel Spindle) - Assemble
AccuGrade For Wheel Tractor-Scrapers Sensor Firmware Upgrade
2008/12/08 An Improved Solenoid Valve Group is Now Used {5479}
797 Off-Highway Truck Maintenance Interval Schedule
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.