Screen (Hoist) - Assemble
组装步骤
Show/hide table
所需工具     | |||
工具     | 零件号     | 零件描述     | 数量     |
A     | 1P-1862     | 钳     | 1     |
B     | 9S-3263     | 螺纹锁固胶     | 1     |
- 安装阀芯 (17) 。
Show/hide table
图 1 | g01626155 |
- 将工具 (B) 涂抹在节流孔 (18) 上。 不要让工具 (B) 堵住孔。 安装节流孔 (18) 。 拧紧节流孔 (18) 至扭矩为 0.67 ± 0.11 N·m (5.93 ± 0.97 lb in)。
- 安装 O 形密封圈 (19) 和螺塞 (20) 。
- 安装弹簧 (16) 、垫片 (15) 和活塞 (14) 。 组装时使用的垫片数量请勿超过四片以上。
Show/hide table
图 2 | g01626117 |
Show/hide table
被弹簧力爆出的零件击中,会招致人员伤害。 确保穿上所有必要的保护装备。 遵照建议的程序,并使用所有建议的工具以释放弹簧力。 |
- 安装开关 (13) 。 拧紧开关 (13) 至扭矩为 80 ± 10 N·m (59 ± 7 lb ft)。
- 安装 O 形密封圈 (11) 和螺塞 (12) 。
- 安装螺塞 (10) 、O 形密封圈 (9) 和螺塞 (8) 。
- 安装滤网 (4) 、弹簧 (5) 和垫圈 (6) 。
Show/hide table
图 3 | g01626084 |
Show/hide table
被弹簧力爆出的零件击中,会招致人员伤害。 确保穿上所有必要的保护装备。 遵照建议的程序,并使用所有建议的工具以释放弹簧力。 |
- 使用工具 (A) 将挡圈 (7) 安装到举倾机构滤网 (3) 中。
- 安装 O 型密封圈。 连接歧管 (1) 和举倾机构滤网 (3) 。 安装螺栓 (2) 。
Show/hide table
图 4 | g01626101 |
End By: 安装举倾机构滤网。 请参阅 拆解和组装, "举倾机构滤网 - 安装"。
Caterpillar Information System:
795F AC and 795F AC XQ Off-Highway Truck Machine Systems Screen (Hoist) - Disassemble
795F AC and 795F AC XQ Off-Highway Truck Machine Systems Screen (Hoist) - Install
795F AC and 795F AC XQ Off-Highway Truck Machine Systems Screen (Hoist) - Remove
Procedure to Install a New Proportional Valve and Software on Certain Cold Planers{5479, 7620} Procedure to Install a New Proportional Valve and Software on Certain Cold Planers{5479, 7620}
795F AC and 795F AC XQ Off-Highway Truck Machine Systems Oil Cooler (Brake) - Install
795F AC and 795F AC XQ Off-Highway Truck Machine Systems Oil Cooler (Brake) - Remove
PL61 Pipelayer Machine Systems Piston Pump (Implement) - Remove
2008/12/22 A New Tire Rim is Now Used on Certain Pneumatic Compactors {4209}
2008/09/15 An Improved Track Shoe Is Being Installed {4172}
422E, 428E, 432E, 434E, 442E and 444E Backhoe Loaders Machine Systems Lift Arms - Install
422E, 428E, 432E, 434E, 442E and 444E Backhoe Loaders Machine Systems Lift Arms - Remove
795F AC and 795F AC XQ Off-Highway Truck Machine Systems Metering Pump (HMU) - Remove and Install
PL61 Pipelayer Machine Systems Piston Pump (Implement) - Install
Procedure to Apply Sealant to the Implement Joystick{5705} Procedure to Apply Sealant to the Implement Joystick{5705}
430E Backhoe Loader Extendable Stick - Remove and Install
PL61 Pipelayer Power Train Piston Pump (Hydrostatic) - Remove
430E Backhoe Loader Service Brake Control - Remove and Install
430E Backhoe Loader Metering Pump (Steering) - Remove and Install
587R Pipelayer Hydraulic System Accumulator
430E Backhoe Loader Lift Arms - Remove and Install
2008/08/18 An Improved Water Pump Is Now Used {1361}
Failed Service Meters{7478} Failed Service Meters{7478}
2008/09/22 A Filtered Vent is Available for the Fuel Tank Fast Fill Vent {1710}
430E Backhoe Loader Quick Coupler - Remove and Install