Steering Accumulator - Install
Show/hide table
| Required Tools | |||
| Tool | Part Number | Part Description | Qty |
| A | 9U-5980 | Lifting Clamp | 1 |
Show/hide table
| NOTICE |
|---|
|
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. |
Show/hide table
 |
|
Hydraulic accumulator contains gas and oil under high pressure. Improper removal or repair procedures could cause severe injury. To remove or repair, instructions in the service manual must be followed. Special equipment is required for testing and charging. |
Note: Inspect the O-ring seals. Replace the O-ring seals that are worn or damaged.
Note: Lubricate all of the O-ring seals lightly with the lubricant that is being sealed.
- Use Tooling (A) and a suitable lifting device in order to install steering accumulator (3). The weight of steering accumulator (3) is approximately
554 kg (1221 lb) . Install clamps (4).Show/hide table
Illustration 3 g01585957 - Install adapter (2). Connect hose assembly (1).
- Fill the steering hydraulic tank. Refer to Operation and Maintenance Manual, "Steering System Oil - Change".
- Charge the steering accumulator with nitrogen. Refer to Steering Systems Operation/Testing And Adjusting , "Steering Accumulator - Test and Charge".
Show/hide table
| |
| Illustration 1 | g01585941 |
Show/hide table
| |
| Illustration 2 | g01585955 |
Caterpillar Information System:
785D OEM Off-Highway Truck Machine Systems Steering Accumulator - Remove
2008/08/04 Updated Plates are Used in the Snow Wing Mounting Groups {6158}
2008/09/29 A Check Valve Maintains Charging Priority of the Brake System in High Ambient Conditions {5057, 5067}
AS2251 and AS2301 Screeds Heater Element - Test
785D OEM Off-Highway Truck Machine Systems Metering Pump (Steering) - Install
785D OEM Off-Highway Truck Machine Systems Metering Pump (Steering) - Remove
422E, 428E, 432E, 434E, 442E and 444E Backhoe Loaders Machine Electronics and Electrical Systems Connector Contact Description
422E, 428E, 432E, 434E, 442E and 444E Backhoe Loaders Machine Electronics and Electrical Systems Calibration
785D OEM Off-Highway Truck Machine Systems Piston Pump (Steering) - Assemble
785D OEM Off-Highway Truck Machine Systems Piston Pump (Steering) - Disassemble
797B Off-Highway Truck Engine Supplement Radiator Module - Remove
2015/04/03 Recommendations for Battery Charging for Genset Usage {1401, 1406}
C7 Engines for Caterpillar Built Machines Crankshaft Pulley
AP600D Asphalt Paver Machine Systems General Information (Auger and Conveyor System)
422E and 428E Backhoe Loaders Shipping the Machine
AP600D Asphalt Paver Machine Systems Operator Controls (Auger and Conveyor System)
CD54 Vibratory Compactor Machine Systems Battery and Battery Cable - Separate and Connect
785D OEM Off-Highway Truck Machine Systems Steering Accumulator - Disassemble
785D OEM Off-Highway Truck Machine Systems Steering Accumulator - Assemble
2008/08/18 Improved Floodlights Are Now Available {1434}
10-20B and 8-16B Extend-A-Mat Screed Heater Element - Test
432E, 434E, 442E and 444E Backhoe Loaders Monitoring System
422E, 428E, 432E, 434E, 442E and 444E Backhoe Loaders Before Operation
422E, 428E, 432E, 434E, 442E and 444E Backhoe Loaders Alternate Exit