Oil Bypass Valve
Usage:
Remove & Install Oil Bypass Valves
Show/hide table
There are two springs under compression behind cover (2). To prevent personal injury, hold cover (2) as three bolts (1) are removed. |
1. Remove three bolts (1) and cover (2).
2. Remove two springs (3) and plungers (4).
3. Put clean engine oil on two plungers (3) at installation. Install in reverse order.
Caterpillar Information System:
3408 & 3412 INDUSTRIAL ENGINES Fuel Shutoff Solenoid
3408 & 3412 INDUSTRIAL ENGINES Governor & Fuel Injection Pump Housing
3408 & 3412 INDUSTRIAL ENGINES Fuel Transfer Pump
3408 & 3412 INDUSTRIAL ENGINES Personality Ratings Module
3408 & 3412 INDUSTRIAL ENGINES Control Module
3408 & 3412 INDUSTRIAL ENGINES Fuel Injection Pumps
3408 & 3412 INDUSTRIAL ENGINES Fuel Injection Nozzles & Adapters
3408 & 3412 INDUSTRIAL ENGINES Fuel Injection Lines
3408 & 3412 INDUSTRIAL ENGINES Fuel Priming Pump & Filter Base
3408 & 3412 INDUSTRIAL ENGINES Automatic Timing Advance
3408 & 3412 INDUSTRIAL ENGINES Water Temperature Regulator
3408 & 3412 INDUSTRIAL ENGINES Water Pump
3408 & 3412 INDUSTRIAL ENGINES Oil Filter Base
3408 & 3412 INDUSTRIAL ENGINES Oil Cooler
3408 & 3412 INDUSTRIAL ENGINES Oil Pan
3408 & 3412 INDUSTRIAL ENGINES Oil Pump
3408 & 3412 INDUSTRIAL ENGINES Piston Cooling Tubes
HEINZMAN GOVERNOR (3600 MARINE APPLICATION) Introduction
HEINZMAN GOVERNOR (3600 MARINE APPLICATION) E30 Electric Governor System
HEINZMAN GOVERNOR (3600 MARINE APPLICATION) Initial Checks And Adjustments At Installation
HEINZMAN GOVERNOR (3600 MARINE APPLICATION) Troubleshooting Heinzmann Electronic Speed Governors
HEINZMAN GOVERNOR (3600 MARINE APPLICATION) Service Procedures
HEINZMAN GOVERNOR (3600 MARINE APPLICATION) System Operation Of The SW 50-03 Setpoint Adjuster
HEINZMAN GOVERNOR (3600 MARINE APPLICATION) Technical Data