CP56, CS56, CP64, CS64, CP74 and CS74 Vibratory Soil Compactors Machine Systems Caterpillar


Flood Lighting

Usage:

CP-56 C5P


Illustration 1g01420338

(1) Maximum torque for each of four nuts ... 20 N·m (15 lb ft)

(2) Apply 8T-9014 Silicone Sealant in order to fill the gap between the grommet and wires. This will ensure that water does not leak between the grommet and the wires.

(3) Torque for each of four nuts ... 9 ± 1 N·m (80 ± 9 lb in)

(4) Maximum torque for each of four screws ... 15 N·m (11 lb ft)

(5) Apply 8T-9014 Silicone Sealant in order to fill the gap between the cover and the sheet metal of the cab. This will ensure that water does not leak between the cover and the sheet metal of the cab.

Caterpillar Information System:

C175-16 Locomotive Engine Fuel Lines - Fuel Lines for the High Pressure Fuel Pump
CP56, CS56, CP64, CS64, CP74 and CS74 Vibratory Soil Compactors Machine Systems Metering Pump (Steering)
The Torque Converter Inlet Relief Valve May Come Out of The Bore{3133} The Torque Converter Inlet Relief Valve May Come Out of The Bore{3133}
CP76 and CS76 Vibratory Compactors Machine Systems Hydraulic Schematic (Hydraulic Fan)
Procedure to Install the New Pinion Shaft and Circle Worm Drive in the Circle Drive{5207} Procedure to Install the New Pinion Shaft and Circle Worm Drive in the Circle Drive{5207}
12M and 120M Motor Graders Power Train Transmission Oil Cooler - Install
CP54 and CS54 Vibratory Soil Compactors Propel System Pressure Override Valve (Axle Propel Pump) - Test and Adjust
12M and 120M Motor Graders Power Train Transmission Oil Cooler - Remove
2007/10/08 Test Lines Are No Longer Used {1359, 4250, 4300, 4324, 5050, 5070, 5117}
938H Wheel Loader and IT38H Integrated Toolcarrier Power Train Electronic Control Module
CP56B, CP68B, CS56B and CS68B Vibratory Soil Compactors Machine Systems Hydraulic Cylinder (Leveling Blade)
14L Motor Grader Machine Systems Front Frame from Rear Frame (Articulating Hitch) - Separate
2008/04/14 Correction to Systems Operation Testing and Adjusting , "Glow Plug" {1412}
2008/04/14 Correction to Systems Operation Testing and Adjusting , "Engine Start" {1408, 1450}
2008/04/14 Correction to Systems Operation Troubleshooting Testing and Adjusting , "Engine Stop (Remote Control)" {1408, 7000}
2008/04/14 Correction to Systems Operation Troubleshooting Testing and Adjusting , "Engine Start (Remote Control)" {7000}
CP56, CS56, CP64, CS64, CP74 and CS74 Vibratory Soil Compactors Machine Systems Smooth Drum Scraper - Steel
CP56, CS56, CP64, CS64, CP74 and CS74 Vibratory Soil Compactors Machine Systems Smooth Drum Scraper - Flex
CP56, CS56, CP64, CS64, CP74 and CS74 Vibratory Soil Compactors Machine Systems Drum Installation Group
CP54 and CS54 Vibratory Soil Compactors Propel System Piston Pump Neutral (Drum Propel Pump) - Adjust
C1.5 and C2.2 Engines for Caterpillar Built Machines Air Inlet and Exhaust System
420E, 430E, 432E, 434E, 442E and 444E Backhoe Loaders Engine Starting with Starting Aid
770 and 772 Off-Highway Truck Hydraulic and Braking System Brake System Troubleshooting
AP655D Asphalt Paver Propel System Final Drive Planetary (Steel Track)
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.