Fuel Lines - Fuel Lines for the High Pressure Fuel Pump
Show/hide table
| |
| 图 1 | g03082965 |
|
(1) 341-6784 燃油管
(2) 341-6785 燃油管 (3) 360-1596 块 (4) 311-8193 螺栓 (5) 328-7116 支架组件 (6) 327-7734 燃油油轨总成 (7) 6V-5815 螺栓 (8) 6V-5839 垫圈 | |
Show/hide table
| 304-9602 喷油管总成的技术规格 |
| 注：执行下述步骤，以安装高压燃油管。 注：安装前，使用清洁的发动机机油润滑燃油管两端。 1. 将燃油管 (2) 插入燃油油轨 (6) 和块 (3)。 使用螺栓 (4) 和垫圈 (8) 将燃油管 (2) 固定到燃油油轨 (6) 和块 (3) 上。 2. 将螺栓 (4) 均匀手动拧紧到燃油油轨 (6) 上。 3. 使用螺栓 (7) 将块 (3) 均匀手动拧紧到燃油泵适配器（未显示）上。 4. 将螺栓 (4) 均匀拧紧到燃油油轨 (6) 上，扭矩为 5. 将螺栓 (4) 均匀拧紧到块 (3) 上，扭矩为 6. 将螺栓 (7) 均匀拧紧到泵适配器上，扭矩为 7. 将螺栓 (4) 均匀拧紧到燃油油轨 (6) 上，扭矩为 8. 将螺栓 (4) 均匀拧紧到块 (3) 上，扭矩为 9. 按标准扭矩将螺栓 (7) 均匀拧紧到泵适配器上。 10. 安装支架 (5) 和所有安装固件。 11. 将燃油管 (1) 插入高压燃油泵和块 (3)。 使用螺栓 (4) 和垫圈 (8) 将燃油管 (1) 连接到高压燃油泵和块 (3) 上。 12. 将螺栓 (4) 均匀手动拧紧到高压燃油泵上。 13. 将螺栓 (4) 均匀手动拧紧到块 (3) 上。 14. 将螺栓 (4) 均匀拧紧到高压燃油泵上，扭矩为 15. 将螺栓 (4) 均匀拧紧到块 (3) 上，扭矩为 16. 将螺栓 (4) 均匀拧紧到高压燃油泵上，扭矩为 17. 将螺栓 (4) 均匀拧紧到块 (3) 上，扭矩为 18. 安装支架 (5) 和所有安装固件。 |
Caterpillar Information System:
CP56, CS56, CP64, CS64, CP74 and CS74 Vibratory Soil Compactors Machine Systems Metering Pump (Steering)
The Torque Converter Inlet Relief Valve May Come Out of The Bore{3133} The Torque Converter Inlet Relief Valve May Come Out of The Bore{3133}
CP76 and CS76 Vibratory Compactors Machine Systems Hydraulic Schematic (Hydraulic Fan)
Procedure to Install the New Pinion Shaft and Circle Worm Drive in the Circle Drive{5207} Procedure to Install the New Pinion Shaft and Circle Worm Drive in the Circle Drive{5207}
12M and 120M Motor Graders Power Train Transmission Oil Cooler - Install
CP54 and CS54 Vibratory Soil Compactors Propel System Pressure Override Valve (Axle Propel Pump) - Test and Adjust
12M and 120M Motor Graders Power Train Transmission Oil Cooler - Remove
2007/10/08 Test Lines Are No Longer Used {1359, 4250, 4300, 4324, 5050, 5070, 5117}
938H Wheel Loader and IT38H Integrated Toolcarrier Power Train Electronic Control Module
CP56B, CP68B, CS56B and CS68B Vibratory Soil Compactors Machine Systems Hydraulic Cylinder (Leveling Blade)
14L Motor Grader Machine Systems Front Frame from Rear Frame (Articulating Hitch) - Separate
CP56, CS56, CP64, CS64, CP74 and CS74 Vibratory Soil Compactors Machine Systems Eccentric Weight Housing Group
CP56, CS56, CP64, CS64, CP74 and CS74 Vibratory Soil Compactors Machine Systems Flood Lighting
2008/04/14 Correction to Systems Operation Testing and Adjusting , "Glow Plug" {1412}
2008/04/14 Correction to Systems Operation Testing and Adjusting , "Engine Start" {1408, 1450}
2008/04/14 Correction to Systems Operation Troubleshooting Testing and Adjusting , "Engine Stop (Remote Control)" {1408, 7000}
2008/04/14 Correction to Systems Operation Troubleshooting Testing and Adjusting , "Engine Start (Remote Control)" {7000}
CP56, CS56, CP64, CS64, CP74 and CS74 Vibratory Soil Compactors Machine Systems Smooth Drum Scraper - Steel
CP56, CS56, CP64, CS64, CP74 and CS74 Vibratory Soil Compactors Machine Systems Smooth Drum Scraper - Flex
CP56, CS56, CP64, CS64, CP74 and CS74 Vibratory Soil Compactors Machine Systems Drum Installation Group
CP54 and CS54 Vibratory Soil Compactors Propel System Piston Pump Neutral (Drum Propel Pump) - Adjust
C1.5 and C2.2 Engines for Caterpillar Built Machines Air Inlet and Exhaust System
420E, 430E, 432E, 434E, 442E and 444E Backhoe Loaders Engine Starting with Starting Aid
770 and 772 Off-Highway Truck Hydraulic and Braking System Brake System Troubleshooting