Additional Parts are Available for the Filler Cap {3177, 4332, 5056}
- Off-Highway Truck/Tractor:
- 784C (S/N: 2PZ1-UP)
- 785 (S/N: 8GB1-UP)
- 785B (S/N: 6HK1-UP)
- 785C (S/N: 1HW1-UP; APX1-UP; 5AZ1-UP)
- 789 (S/N: 9ZC1-UP)
- 789B (S/N: 7EK1-UP)
- 789C (S/N: 2BW1-UP)
- 793 (S/N: 3SJ1-UP)
- 793B (S/N: 1HL1-UP)
- 793C (S/N: CBR1-UP; 4AR1-UP; ATY1-UP; 4GZ1-UP)
- 793D (S/N: FDB1-UP)
- 797 (S/N: 5YW1-UP)
- 797B (S/N: JSM1-UP)
The 7H-1447 Filler Cap is part of the groups that are listed in Table 1.
Show/hide table
Use of the 7H-1447 Filler Cap     | |
Description     | Part Number     |
Steering Tank and Filter Gp     | 155-4127, 6E-6296, 155-4127, 155-6660, 6E-0918, 125-4276, 132-6285, 248-6246     |
Hydraulic and Transmission Tank (Torque Converter), (Hoist), (Brake) and (Transmission)     | 161-0536, 4T-4147, 9T-8921     |
Hydraulic and Transmission Tank     | 4T-2732, 9T-7972     |
Tank and Filter Gp     | 1U-4840, 9T-4157     |
Power Train Oil Lines Gp     | 124-7704, 240-4803     |
Torque Converter Ar     | 140-7001, 284-4239     |
Hydraulic Tank Guard Gp     | 149-1200     |
Show/hide table
Illustration 1 | g01409828 |
A typical view of the filler cap |
When you order a new 7H-1447 Filler Cap (1), additional parts must be ordered in order for the filler cap to correctly fit. The additional parts are usually part of the group or arrangement. The additional parts will prevent contamination from entering the systems. When you order a new 7H-1447 Filler Cap (1), also order the following parts.
The parts can be used back to the beginning of production of the machines. Order the parts through the parts distribution system.
Caterpillar Information System:
CS54 and CP54 Vibratory Soil Compactors Engine Air Filter Primary Element - Clean/Replace
143H and 163H Motor Graders Wheel Bearing Oil Sample (Front) - Obtain - If Equipped
3500B Engines and 776D, 777D, 784C, 785C, 789C, 793C and 793D Off-Highway Truck/Tractors Turbocharger
CP76 and CS76 Vibratory Compactors Propel System Relief Valve (Main, Drum Propel Pump) - Test and Adjust
770 and 772 Off-Highway Trucks Power Train Transfer Gears - Assemble
770 and 772 Off-Highway Trucks Power Train Transfer Gears - Disassemble
CP76 and CS76 Vibratory Compactors Propel System Relief Valve (Charge Pressure, Axle Propel Pump) - Test and Adjust
3176C Engine for the R1600G and the R1700G Load Haul Dumps Shutdown - Test
CP76 and CS76 Vibratory Compactors Propel System Relief Valve (Charge Pressure, Drum Propel Pump) - Test and Adjust
R1600G Load Haul Dump Fire Suppression System - Check - If Equipped
CS54 and CP54 Vibratory Soil Compactors Lubricant Viscosities
140M Motor Grader Engine Supplement Refrigerant Compressor - Remove and Install
770 and 772 Off-Highway Trucks Power Train Transmission Hydraulic Control - Remove
3176C Engine for Caterpillar Built Machines Injector Solenoid - Test
770 and 772 Off-Highway Trucks Power Train Transmission Hydraulic Control - Install
770 and 772 Off-Highway Trucks Power Train Transmission Hydraulic Control - Disassemble
770 and 772 Off-Highway Trucks Power Train Transmission Hydraulic Control - Assemble
Wiring the 9X-9591 Electrical Converter Gp (PULSE WIDTH MODULATED){1421, 1901, 7490} Wiring the 9X-9591 Electrical Converter Gp (PULSE WIDTH MODULATED){1421, 1901, 7490}
3524B and C175 Engines for Off-Highway Truck/Tractors Turbocharger
3176C Engine for the R1600G and the R1700G Load Haul Dumps Sensor Signal (Analog, Active) - Test
C4.4 (Mech) Industrial Engine Fuel System Pressure - Test
Information Is Not Provided in Specifications, RENR4895 for B2 Series Skid Steer Loaders{5050, 7000} Information Is Not Provided in Specifications, RENR4895 for B2 Series Skid Steer Loaders{5050, 7000}
16M Motor Grader Operator Controls
CP54 and CS54 Vibratory Soil Compactors Machine Systems Operator Compartment