Hydraulic Tank and Filter - Install
Installation Procedure
- Attach a suitable lifting device onto hydraulic tank and filter (9). The weight of hydraulic tank (9) is approximately 168 kg (370 lb).
Show/hide table
 | |
| Illustration 1 | g01391965 |
- Position Hydraulic tank and filter (9) .
- Install bolt (10) .
Show/hide table
 | |
| Illustration 2 | g01391968 |
- Repeat Step 3 for the opposite side.
- Position manifold (8). Install bolts (7) .
Show/hide table
 | |
| Illustration 3 | g01391963 |
- Install bolts (6). Connect harness assemblies (5). Install cable strap (4).
Show/hide table
 | |
| Illustration 4 | g01391961 |
- Position manifold (1). Install bolts (3) .
Show/hide table
 | |
| Illustration 5 | g01391960 |
- Connect hose assembly (2) .
- Fill the hydraulic tank. Refer to Operation and Maintenance Manual, "Hydraulic Oil - Change".
End By: Install the hood and the dust ejector. Refer to Disassembly and Assembly, "Hood and dust ejector - Remove and Install".
Caterpillar Information System:
587R Pipelayer Machine Systems Hydraulic Tank and Filter - Remove
C15 and C18 Generator Set Engines Radiator Top Tank - Remove and Install - Jacket Water Heater
420E, 430E, 432E, 434E, 442E and 444E Backhoe Loaders Hydraulic and Steering System Control Valve (Swing)
C15 and C18 Generator Set Engines Radiator Bottom Tank - Remove and Install - Jacket Water Heater
938H Wheel Loader and IT38H Integrated Toolcarrier Hydraulic System Pilot Valve
420E, 430E, 432E, 434E, 442E and 444E Backhoe Loaders Hydraulic and Steering System Control Valve (Bucket)
EquipmentManager Dealer Administrator Manual Asset Watch
EquipmentManager User Guide Preferences
3408E and 3412E Engines for Caterpillar Built Machines Engine Overspeeds on Start-up
EquipmentManager Dealer Administrator Manual Manage Planned Maintenance
EquipmentManager User Guide Upload Data
EquipmentManager Dealer Administrator Manual Manage Event Tracking
2007/07/16 Improved Belts are now Used {1357, 1397, 1405, 7320}
3408E and 3412E Engines for Caterpillar Built Machines Cylinder Head
3412E Engine for Caterpillar Built Machines Engine Shutdown Is Intermittent
3412E Engine for Caterpillar Built Machines Engine Top Speed Is Not Obtained
C4.4 and C6.6 Engines for Caterpillar Built Machines Coolant Temperature Is Too High
C4.4 and C6.6 Engines for Caterpillar Built Machines Engine Misfires, Runs Rough or Is Unstable
C4.4 and C6.6 Engines for Caterpillar Built Machines Engine Speed Does Not Change
C4.4 and C6.6 Engines for Caterpillar Built Machines Excessive Fuel Consumption
C4.4 and C6.6 Engines for Caterpillar Built Machines Intake Air Temperature Is Too High
Installation of Fuel Lines{1274} Installation of Fuel Lines{1274}
770 and 772 Off-Highway Truck/Tractors Steering Link - Remove and Install
3176C, 3406E and 3456 Industrial Engines Exhaust Temperature Is High