Usage:
1. Loosen hose clamp (1) and remove the rubber sleeve from oil cooler (2).
2. Loosen hose clamp (3) and remove the rubber sleeve from oil cooler (2).
3. Remove four bolts (4) and remove oil cooler (2).
NOTE: The following steps are for the installation of the oil cooler.
4. Position oil cooler (2) and install bolts (4).
5. Install the rubber sleeves on each end of oil cooler (2). Position and tighten hose clamps (1) and (3).
Remove & Install Oil Cooler (Marine Transmission Gear) (3126 Engine)
1. Loosen hose clamp (1) and remove the rubber sleeve from oil cooler (2).
2. Loosen hose clamp (3) and remove the rubber sleeve from oil cooler (2).
3. Remove four bolts (4) and remove oil cooler (2).
NOTE: The following steps are for the installation of the oil cooler.
4. Position oil cooler (2) and install bolts (4).
5. Install the rubber sleeves on each end of oil cooler (2). Position and tighten hose clamps (1) and (3).