SUPPLEMENT FOR 3116 & 3126 MARINE ENGINE Caterpillar


Water Temperature Regulator

Usage:

Remove & Install Water Temperature Regulator

Start by:

a. remove expansion tank


Typical Example

1. Loosen hose clamp (1) and disconnect hose (2).

2. Remove two bolts (3), then remove regulator cover (4).

3. Remove regulator (6) from housing (5).

NOTE: The following steps are for the installation of the water temperature regulator.


NOTICE

If the water temperature regulator is installed wrong it will cause the engine to overheat.


4. Position regulator (6) in housing (5) properly.

5. Position gasket and regulator cover (4), then install bolts (3).

6. Install hose (2), then tighten hose clamp (1).

End by:

a. install expansion tank

Caterpillar Information System:

SUPPLEMENT FOR 3116 & 3126 MARINE ENGINE Water Temperature Regulator Housing
SUPPLEMENT FOR 3116 & 3126 MARINE ENGINE Water Temperature Regulator Housing
SUPPLEMENT FOR 3116 & 3126 MARINE ENGINE Watercooled Turbocharger
SUPPLEMENT FOR 3116 & 3126 MARINE ENGINE Watercooled Turbocharger
SUPPLEMENT FOR 3116 & 3126 MARINE ENGINE Alternator
SUPPLEMENT FOR 3116 & 3126 MARINE ENGINE Testing & Adjusting
SUPPLEMENT FOR 3116 & 3126 MARINE ENGINE Systems Operation
SUPPLEMENT FOR 3116 & 3126 MARINE ENGINE Power Take-Off Group (Front)
SUPPLEMENT FOR 3116 & 3126 MARINE ENGINE Auxiliary Water Pump
SUPPLEMENT FOR 3116 & 3126 MARINE ENGINE Jacket Water Heater
SUPPLEMENT FOR 3116 & 3126 MARINE ENGINE Water Temperature Regulator
SUPPLEMENT FOR 3116 & 3126 MARINE ENGINE Electric Starting Motor Solenoid
SUPPLEMENT FOR 3116 & 3126 MARINE ENGINE Expansion Tank
SUPPLEMENT FOR 3116 & 3126 MARINE ENGINE Heat Exchanger
SUPPLEMENT FOR 3116 & 3126 MARINE ENGINE Raw Water Pump
SUPPLEMENT FOR 3116 & 3126 MARINE ENGINE Oil Cooler (Marine Transmission Gear)
3406B INDUSTRIAL & MARINE ENGINES Introduction
3406B INDUSTRIAL & MARINE ENGINES Engine Design
3406B INDUSTRIAL & MARINE ENGINES Fuel System Identification
3406B INDUSTRIAL & MARINE ENGINES Fuel Injection Lines (4TB470-UP), (6TB1779-UP)
3406B INDUSTRIAL & MARINE ENGINES Fuel Injection Nozzle And Adapter (4TB470-Up), (6TB1779-Up)
3406B INDUSTRIAL & MARINE ENGINES Fuel Injection Lines
3406B INDUSTRIAL & MARINE ENGINES Fuel Injection Nozzle And Adapter
3406B INDUSTRIAL & MARINE ENGINES Fuel Transfer Pump
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.