Bank Valve (Loader) - Install
- Attach a suitable lifting device to bank valve (23). The weight of bank valve (23) is approximately
40 kg (90 lb) . Install bank valve (23) and bolts (22).Show/hide tableIllustration 2 g01379088 - Connect tube assemblies (16) and (18). Connect hose assemblies (17), (19), and (20). Connect harness assembly (21).
Show/hide table
Illustration 3 g01379086 - Connect hose assemblies (11), (12), and (13). Connect tube assemblies (14) and (15).
Show/hide table
Illustration 4 g01379084 - Connect tube assemblies (9) and (10). Connect hose assembly (8). Install pin (7) in order to connect yokes (6).
Show/hide table
Illustration 5 g01242019 - Install floorplate (4) and bolts (5).
Show/hide table
Illustration 6 g01118850 - Install floor mat (1). Install plate (2) and bolts (3). Repeat for the other side.
- Fill the hydraulic system with clean oil. Refer to Operation and Maintenance Manual, "Hydraulic System Oil - Change".
Show/hide table
Illustration 1 | g01379089 |
Caterpillar Information System:
414E, 416E, 420E, 422E, 428E, 430E, 432E, 434E, 442E and 444E Backhoe Loaders Hydraulic and Steering System Control Manifold (Pilot Operated) - Inlet Manifold for the Backhoe
Installation of the AccuGrade® - Grade Control System for the Motor Graders{7220} Installation of the AccuGrade® - Grade Control System for the Motor Graders{7220}
24M Motor Grader Power Train Electronic Control System MID 027 - CID 0681 - FMI 06
24M Motor Grader Power Train Electronic Control System MID 027 - CID 0681 - FMI 05
24M Motor Grader Power Train Electronic Control System MID 027 - CID 0681 - FMI 03
770 and 772 Off-Highway Truck/Tractors Pin (Body Retaining) - Remove and Install
422E, 428E, 432E, 434E, 442E and 444E Backhoe Loaders Hydraulic and Steering System Control Manifold (Pilot Operated) - Inlet Manifold for the Loader
2007/05/28 A new Hose is Used for the Inlet to the Turbocharger {1051, 1054}
2007/06/04 A Dye is Now Added to the Engine Oil at the Factory {1348}
414E, 416E, 420E, 422E, 428E, 430E, 432E, 434E, 442E and 444E Backhoe Loaders Hydraulic and Steering System Control Manifold (Pilot Operated) - Inlet Manifold for the Loader
160M Motor Grader Engine Supplement Engine - Install
2007/06/04 A Dye is Now Added to the Engine Oil at the Factory {1348}
450E Backhoe Loader Machine Systems Bank Valve (Backhoe) - Remove
16M Motor Grader Machine Systems Front Frame from Rear Frame (Articulating Hitch) - Separate
Installing the 307-6237 Roading Lights Mounting Gp (KIT) (GERMANY) (ITALY){1429} Installing the 307-6237 Roading Lights Mounting Gp (KIT) (GERMANY) (ITALY){1429}
16M Motor Grader Machine Systems Front Frame to Rear Frame (Articulating Hitch) - Connect
2007/08/27 A New Temperature Gauge is Used {7450}
IT38H Integrated Toolcarrier and 938H Wheel Loader Steering System Secondary Steering System
2009/08/24 An Improved Solenoid Valve Group Is Used In Transmissions With ICM For Increased Reliability And Longer Service Life {3124, 3167, 3174}
2007/05/28 An Improved Battery Isolation Control is Now Used {1402, 1408}
C4.4 (MECH) Industrial Engine and Generator Sets Fuel Priming Pump and Fuel Filter Base - Remove and Install
C4.4 (MECH) Industrial Engine and Generator Sets Fuel Injection Lines - Remove and Install
C4.4 (MECH) Industrial Engine and Generator Sets Fuel Injector Cover - Remove and Install
C6.6 Engines For Caterpillar Built Machines CID 2417 FMI 05