Exhaust Manifold
Usage:
Remove and Install Exhaust Manifold
Start By:
a. remove turbocharger
1. Remove bolts (1) and remove manifold (2) with gasket.
NOTE: The following step is for the installation of the exhaust manifold.
NOTE: Apply 5P3931 Anti-Seize Compound to the threads of bolts (1).
2. Position gasket and manifold (2). Install all manifold bolts (1) finger tight, then tighten evenly to a torque of 35 ± 5 N·m (26 ± 4 lb.ft.).
End By:
a. install turbocharger
Caterpillar Information System:
3176 DIESEL TRUCK ENGINES Turbocharger
3176 DIESEL TRUCK ENGINES Fuel Manifold, Siphon Block And Pressure Relief Valve
3176 DIESEL TRUCK ENGINES Fuel Transfer Pump
3176 DIESEL TRUCK ENGINES Fuel Filter Base
3176 DIESEL TRUCK ENGINES Fuel Priming Pump
3176 DIESEL TRUCK ENGINES Engine Oil Pump
3176 DIESEL TRUCK ENGINES Water Pump
3176 DIESEL TRUCK ENGINES Oil cooler
3176 DIESEL TRUCK ENGINES Oil Filter And Oil Filter Base
3176 DIESEL TRUCK ENGINES Air Compressor
3176 DIESEL TRUCK ENGINES Alternator
3176 DIESEL TRUCK ENGINES Drive Belt And Drive Belt Tensioner
3176 DIESEL TRUCK ENGINES Air Intake Manifold
3176 DIESEL TRUCK ENGINES Water Temperature Regulator
3176 DIESEL TRUCK ENGINES Water Temperature Sensor
3176 DIESEL TRUCK ENGINES Water Outlet Manifold
3176 DIESEL TRUCK ENGINES Flywheel
3176 DIESEL TRUCK ENGINES Flywheel Housing
3176 DIESEL TRUCK ENGINES Rear Seal Assembly
3176 DIESEL TRUCK ENGINES Vibration Damper and Pulley
3176 DIESEL TRUCK ENGINES Front Crankshaft Seal Assembly
3176 DIESEL TRUCK ENGINES Speed/Timing Sensor
3176 DIESEL TRUCK ENGINES Front Timing Cover
3176 DIESEL TRUCK ENGINES Valve Cover Assembly