Fuel Filter Base
Usage:
Remove And Install Fuel Filter Base
1. Disconnect fuel lines (1) and (2).
2. Remove two bolts (3) and remove the fuel filter base.
NOTE: The following steps are for the installation of the fuel filter base.
3. Position the fuel filter base and install bolts (3).
4. Connect fuel lines (1) and (2).
Caterpillar Information System:
3176 DIESEL TRUCK ENGINES Fuel Priming Pump
3176 DIESEL TRUCK ENGINES Engine Oil Pump
3176 DIESEL TRUCK ENGINES Water Pump
3176 DIESEL TRUCK ENGINES Oil cooler
3176 DIESEL TRUCK ENGINES Oil Filter And Oil Filter Base
3176 DIESEL TRUCK ENGINES Air Compressor
3176 DIESEL TRUCK ENGINES Alternator
3176 DIESEL TRUCK ENGINES Drive Belt And Drive Belt Tensioner
3176 DIESEL TRUCK ENGINES Starter
3176 DIESEL TRUCK ENGINES Personality Module (PM)
3176 DIESEL TRUCK ENGINES Transducer Module (TM)
3176 DIESEL TRUCK ENGINES Electronic Control Module (ECM)
3176 DIESEL TRUCK ENGINES Fuel Transfer Pump
3176 DIESEL TRUCK ENGINES Fuel Manifold, Siphon Block And Pressure Relief Valve
3176 DIESEL TRUCK ENGINES Turbocharger
3176 DIESEL TRUCK ENGINES Exhaust Manifold
3176 DIESEL TRUCK ENGINES Air Intake Manifold
3176 DIESEL TRUCK ENGINES Water Temperature Regulator
3176 DIESEL TRUCK ENGINES Water Temperature Sensor
3176 DIESEL TRUCK ENGINES Water Outlet Manifold
3176 DIESEL TRUCK ENGINES Flywheel
3176 DIESEL TRUCK ENGINES Flywheel Housing
3176 DIESEL TRUCK ENGINES Rear Seal Assembly
3176 DIESEL TRUCK ENGINES Vibration Damper and Pulley