Oil cooler
Usage:
Remove And Install Oil Cooler
Start By:
a. remove oil filter base
b. drain coolant from cooling system
1. Remove four bolts (1) and remove oil cooler with gaskets.
NOTE: The following steps are for the installation of the oil cooler.
2. With gaskets in place, position the oil cooler and install bolts (1).
End By:
a. install oil filter base
b. Fill the cooling system to the specified level. See the Maintenance Manual.
Caterpillar Information System:
3176 DIESEL TRUCK ENGINES Oil Filter And Oil Filter Base
3176 DIESEL TRUCK ENGINES Air Compressor
3176 DIESEL TRUCK ENGINES Alternator
3176 DIESEL TRUCK ENGINES Drive Belt And Drive Belt Tensioner
3176 DIESEL TRUCK ENGINES Starter
3176 DIESEL TRUCK ENGINES Personality Module (PM)
3176 DIESEL TRUCK ENGINES Transducer Module (TM)
3176 DIESEL TRUCK ENGINES Electronic Control Module (ECM)
ELECTRONIC TROUBLESHOOTING 3176 DIESEL TRUCK ENGINE Glossary Of Terms
ELECTRONIC TROUBLESHOOTING 3176 DIESEL TRUCK ENGINE 3176 System Calibrating And Adjusting
ELECTRONIC TROUBLESHOOTING 3176 DIESEL TRUCK ENGINE 3176 Electronic System Functional Tests
ELECTRONIC TROUBLESHOOTING 3176 DIESEL TRUCK ENGINE Troubleshooting Without A Diagnostic Code
3176 DIESEL TRUCK ENGINES Water Pump
3176 DIESEL TRUCK ENGINES Engine Oil Pump
3176 DIESEL TRUCK ENGINES Fuel Priming Pump
3176 DIESEL TRUCK ENGINES Fuel Filter Base
3176 DIESEL TRUCK ENGINES Fuel Transfer Pump
3176 DIESEL TRUCK ENGINES Fuel Manifold, Siphon Block And Pressure Relief Valve
3176 DIESEL TRUCK ENGINES Turbocharger
3176 DIESEL TRUCK ENGINES Exhaust Manifold
3176 DIESEL TRUCK ENGINES Air Intake Manifold
3176 DIESEL TRUCK ENGINES Water Temperature Regulator
3176 DIESEL TRUCK ENGINES Water Temperature Sensor
3176 DIESEL TRUCK ENGINES Water Outlet Manifold