Rear Axle
Show/hide table
Illustration 1 | g02151460 |
Show/hide table
Specification for 287-3526 Rear Axle Gp and 284-5013 Rear Axle Gp | |||
Item | Qty | Part | Specification Description |
1 | - | Studs | Torque to |
2 | - | Nuts | Torque to |
3 | 8 | Bolts | Torque to |
4 | 4 | Dowels | Install until dimension (C) is equal to |
5 | Orient the cast notch in the downward position, when the pinion housing is assembled to the center housing. | ||
6 | 4 | Bolts | Torque to |
7 | - | Use the following procedure before assembly. | |
- | Clean the surfaces of the parts in order to be free of oil, grease, fuel, or any other contaminants. | ||
- | Apply primer to one of the mating parts and allow drying before applying sealant. | ||
- | Apply blue Loctite High Flex GM to one of the mating parts. | ||
8 | - | Elbow assembly | Torque to |
9 | - | Tube assembly | Torque to |
Show/hide table
Illustration 2 | g02151461 |
Section B-B |
Show/hide table
Specification for 287-3526 Rear Axle Gp and 284-5013 Rear Axle Gp | |||
Item | Qty | Part | Specification Description |
10 | - | Ecology drain | Torque to |
- | - | Plug for Ecology drain | Torque to |
11 | - | 209-4527 Shim | |
- | - | Thickness of new shim pack | |
- | - | Outside diameter | |
- | As required, use shims in order to obtain the proper bevel gear mesh backlash and the contact pattern. | ||
12 | Lubricate the seals lightly with the lubricant that is being sealed. | ||
13 | Use the following procedure in order to assemble the needle bearing assembly: | ||
- | Remove one thrust bearing race from the needle bearing assembly. | ||
- | Apply a light layer of lubricant before pressing the thrust bearing race on the thrust bearing. | ||
- | Confirm that the thrust bearing race is piloted on the thrust bearing. | ||
14 | - | Nut | Torque to |
15 | - | 194-8742 Shim | |
- | - | Total thickness of a new shim pack | |
- | - | Outside diameter | |
16 | 6 | Bolts | Torque to |
Caterpillar Information System:
777G Off-Highway Truck Power Train Hydraulic and Transmission Tank (Torque Converter, Hoist, Brake) - Install
279C2 Compact Track Loader and 287C, 277C, 277C2 and 297C Multi Terrain Loaders Engine Supplement Gear Motor (Fan, Aftercooler) - Assemble
279C2 Compact Track Loader and 287C, 277C, 277C2 and 297C Multi Terrain Loaders Engine Supplement Gear Motor (Fan, Aftercooler) - Disassemble
14L Motor Grader Machine Systems Blade - Remove and Install
777D Off-Highway Truck Body Pivot Bearings - Lubricate
CP56, CS56, CP64, CS64, CP74 and CS74 Vibratory Compactors C6.6 Engine Supplement Electric Starting Motor - Remove and Install
IT38H Integrated Toolcarrier and 938H Wheel Loader Engine Supplement Turbocharger - Install
Diesel Particulate Filter Monitoring System {108F, 7490} Diesel Particulate Filter Monitoring System {108F, 7490}
120M, 140M and 160M Motor Graders All Wheel Drive Steering Cylinder and Mounting
777G Off-Highway Truck Power Train Hydraulic and Transmission Tank (Torque Converter, Hoist, Brake) - Remove
2009/03/09 New Axles are Available for Multi Terrain Loaders {3282, 4159, 4192}
12M, 140M and 160M Motor Graders Hydraulic and Steering System Steering Cylinder
IT38H Integrated Toolcarrier and 938H Wheel Loader Engine Supplement Engine Compartment Shield - Remove and Install
2007/03/05 An Improved Hose Assembly in the Water Lines Group {1380}
770, 772, 773F and 777F Off-Highway Truck/Tractors and 775F Quarry Truck Monitoring System Monitor Menu
CP56, CS56, CP64, CS64, CP74 and CS74 Vibratory Compactors C6.6 Engine Supplement Muffler - Remove and Install
279C2 Compact Track Loader and 287C, 277C, 277C2 and 297C Multi Terrain Loaders Engine Supplement Gear Motor (Fan, Aftercooler) - Remove
816F Series 2 Landfill Compactor, 815F Series 2 Soil Compactor and 814F Series 2 Wheel Dozer MID 081 - CID 0562 - FMI 09
816F Series 2 Landfill Compactor, 815F Series 2 Soil Compactor and 814F Series 2 Wheel Dozer MID 081 - CID 1693 - FMI 00
2007/09/10 An Improved Rotary Beacon is Now Used on Cold Planers {1431}
816F Series 2 Landfill Compactor, 815F Series 2 Soil Compactor and 814F Series 2 Wheel Dozer MID 081 - CID 1693 - FMI 01
816F Series 2 Landfill Compactor, 815F Series 2 Soil Compactor and 814F Series 2 Wheel Dozer MID 081 - CID 1693 - FMI 03
279C2 Compact Track Loader and 287C, 277C, 277C2 and 297C Multi Terrain Loaders Engine Supplement Gear Motor (Fan, Aftercooler) - Install
816F Series 2 Landfill Compactor, 815F Series 2 Soil Compactor and 814F Series 2 Wheel Dozer MID 081 - CID 1693 - FMI 04