Hydraulic and Transmission Tank (Torque Converter, Hoist, Brake) - Remove
Show/hide table
Required Tools | |||
Tool | Part Number | Part Description | Qty |
A | 439–3940 | Link Bracket | 2 |
Start By:
- Install the body retaining pins. Refer to Disassembly and Assembly, "Body Retaining Pin - Install".
Show/hide table
NOTICE |
---|
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids. Refer to Special Publication, NENG2500, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat® products. Dispose of all fluids according to local regulations and mandates. |
- Drain the fluid from the hydraulic and transmission tank into a suitable container for proper storage or for disposal. Refer to Operation and Maintenance Manual, "Hydraulic Tank - Refill Capacities".
- Place a suitable container under the hydraulic and transmission tank.
Show/hide table
Illustration 1 g01322749 - Disconnect hose assembly (1). Disconnect hose assembly (2).
Show/hide table
Illustration 2 g01322751 - Disconnect tube assembly (3). Disconnect tube assembly (4). Disconnect hose assembly (5). Disconnect hose assembly (6).
Show/hide table
Illustration 3 g01322756 - Remove screen assemblies (7).
Show/hide table
Illustration 4 g01322758 - Disconnect hose assembly (9). Disconnect fitting (8).
Show/hide table
Illustration 5 g01322760 - Remove bolt (10).
Show/hide table
Illustration 6 g01322762 - Disconnect hose assembly (11). Disconnect fitting (12). Disconnect hose assembly (13).
Show/hide table
Illustration 7 g01322763 - Disconnect hose assembly (14). Remove screen assembly (15). Disconnect hose assembly (16). Disconnect hose assembly (17).
Show/hide table
Illustration 8 g01322770 - Disconnect harness assembly (18). Separate harness assembly (18) from clip (19).
Show/hide table
Illustration 9 g01322771 - Disconnect tube assembly (20). Disconnect hose assembly (21). Disconnect hose assembly (22). Disconnect hose assembly (23).
Show/hide table
Illustration 10 g01322772 - Disconnect hose assembly (24).
Show/hide table
Illustration 11 g01322774 - Disconnect hose assembly (25).
Show/hide table
Illustration 12 g01322775 - Remove bolts (26).
Show/hide table
Illustration 13 g01322776 - Attach Tooling (A). Attach a suitable lifting device to hydraulic and transmission tank (27). The empty weight of the hydraulic and transmission tank is approximately
327 kg (720 lb) .Show/hide tableIllustration 14 g01322779 - Remove bolt (28).
Show/hide table
Illustration 15 g01322780 - Remove cap (29).
Show/hide table
Illustration 16 g01322781 - Remove cap (30). Remove hydraulic and transmission tank (27).
Caterpillar Information System:
2009/03/09 New Axles are Available for Multi Terrain Loaders {3282, 4159, 4192}
12M, 140M and 160M Motor Graders Hydraulic and Steering System Steering Cylinder
IT38H Integrated Toolcarrier and 938H Wheel Loader Engine Supplement Turbocharger - Remove
773E Off-Highway Truck Fuel System - Fill
CP56, CS56, CP64, CS64, CP74 and CS74 Vibratory Compactors C6.6 Engine Supplement Alternator - Remove and Install
CP56, CS56, CP64, CS64, CP74 and CS74 Vibratory Compactors C6.6 Engine Supplement Gear Motor (Hydraulic Fan) - Assemble
CP56, CS56, CP64, CS64, CP74 and CS74 Vibratory Compactors C6.6 Engine Supplement Gear Motor (Hydraulic Fan) - Disassemble
777D Off-Highway Truck Fuel System - Fill
CP56, CS56, CP64, CS64, CP74 and CS74 Vibratory Compactors C6.6 Engine Supplement Suction Fan (Fan and Fan Motor) - Install
CP56, CS56, CP64, CS64, CP74 and CS74 Vibratory Compactors C6.6 Engine Supplement Suction Fan (Fan and Fan Motor) - Remove
287C2 Compact Track Loader and 287C, 277C, 277C2 and 297C Multi Terrain Loaders Machine Systems Gear Pump (Charge) - Assemble - High Flow
287C2 Compact Track Loader and 287C, 277C, 277C2 and 297C Multi Terrain Loaders Machine Systems Gear Pump (Charge) - Disassemble - High Flow
120M, 140M and 160M Motor Graders All Wheel Drive Steering Cylinder and Mounting
Diesel Particulate Filter Monitoring System {108F, 7490} Diesel Particulate Filter Monitoring System {108F, 7490}
IT38H Integrated Toolcarrier and 938H Wheel Loader Engine Supplement Turbocharger - Install
CP56, CS56, CP64, CS64, CP74 and CS74 Vibratory Compactors C6.6 Engine Supplement Electric Starting Motor - Remove and Install
777D Off-Highway Truck Body Pivot Bearings - Lubricate
14L Motor Grader Machine Systems Blade - Remove and Install
279C2 Compact Track Loader and 287C, 277C, 277C2 and 297C Multi Terrain Loaders Engine Supplement Gear Motor (Fan, Aftercooler) - Disassemble
279C2 Compact Track Loader and 287C, 277C, 277C2 and 297C Multi Terrain Loaders Engine Supplement Gear Motor (Fan, Aftercooler) - Assemble
777G Off-Highway Truck Power Train Hydraulic and Transmission Tank (Torque Converter, Hoist, Brake) - Install
14L Motor Grader Power Train Rear Axle
IT38H Integrated Toolcarrier and 938H Wheel Loader Engine Supplement Engine Compartment Shield - Remove and Install
2007/03/05 An Improved Hose Assembly in the Water Lines Group {1380}