Blade - Remove and Install
拆卸步骤
Show/hide table
所需工具     | |||
工具     | 零件号     | 零件说明     | 数量     |
A     | 138-7575     | 连杆支架     | 1     |
B     | 1U-9200     | 操纵杆滚轮起重机     | 1     |
C     | 140-7742     | 套筒     | 2     |
开始:
- 连接转向机架锁。 请参阅拆解和组装, "转向机架锁 - 分离和连接"。
- 提升铲刀组件 (1) 。 利用适当的挡块支撑铲刀组件 (1) 和转盘组件 (2) 的两侧。
Show/hide table
图 1 | g01340852 |
- 拧松锁紧螺母 (3) 。 拧松固定螺钉 (4) 。 在对面重新执行此步骤。
Show/hide table
图 2 | g01340956 |
- 卸下开口销 (5) 。 拆下销 (6) 。
Show/hide table
图 3 | g01340856 |
- 使用工具 (A) 、工具 (B) 、工具 (C) 和适当的起吊设备从转盘组件 (2) 上拉起铲刀组件 (1) 。
Show/hide table
图 4 | g01340967 |
- 将工具 (C) 和另外的适当起吊设备连接至铲刀组件 (1) 上。 卸下铲刀组件 (1) 。 铲刀组件 (1) 的重量约为 907 kg (2000 lb)。
Show/hide table
图 5 | g01340969 |
安装步骤
Show/hide table
所需工具     | |||
工具     | 零件号     | 零件说明     | 数量     |
A     | 138-7575     | 连杆支架     | 1     |
B     | 1U-9200     | 操纵杆滚轮起重机     | 1     |
C     | 140-7742     | 套筒     | 2     |
- 使用工具 (A) 、工具 (B) 、工具 (C) 和两台适当的起吊设备将铲刀组件 (1) 放置在转盘组件 (2) 上。 铲刀组件 (1) 的重量约为 907 kg (2000 lb)。
Show/hide table
图 6 | g01341018 |
Show/hide table
图 7 | g01341025 |
- 使用工具 (A) 和工具 (B) 将铲刀组件 (1) 牵拉到位。
- 安装销 (6) 。 安装开口销 (5) 。
Show/hide table
图 8 | g01340856 |
- 拧紧固定螺钉 (4) 和锁紧螺母 (3) ,使导轨和防磨条之间有 0.13 to 0.89 mm (0.005 to 0.035 inch) 的间隙。 拧紧锁紧螺母 (3) 至 250 ± 40 N·m (184 ± 29 lb ft)。 全范围侧移铲刀组件,以达到最小间隙。
Show/hide table
图 9 | g01340956 |
- 从铲刀组件 (1) 和转盘组件 (2) 上卸下适当的挡块。 降下铲刀组件 (1) 。
Show/hide table
图 10 | g01340852 |
End By: 分离转向机架锁。 请参阅 拆解和组装, "转向机架锁 - 分离和连接"。
Caterpillar Information System:
777D Off-Highway Truck Body Pivot Bearings - Lubricate
CP56, CS56, CP64, CS64, CP74 and CS74 Vibratory Compactors C6.6 Engine Supplement Electric Starting Motor - Remove and Install
IT38H Integrated Toolcarrier and 938H Wheel Loader Engine Supplement Turbocharger - Install
Diesel Particulate Filter Monitoring System {108F, 7490} Diesel Particulate Filter Monitoring System {108F, 7490}
120M, 140M and 160M Motor Graders All Wheel Drive Steering Cylinder and Mounting
777G Off-Highway Truck Power Train Hydraulic and Transmission Tank (Torque Converter, Hoist, Brake) - Remove
2009/03/09 New Axles are Available for Multi Terrain Loaders {3282, 4159, 4192}
12M, 140M and 160M Motor Graders Hydraulic and Steering System Steering Cylinder
IT38H Integrated Toolcarrier and 938H Wheel Loader Engine Supplement Turbocharger - Remove
773E Off-Highway Truck Fuel System - Fill
CP56, CS56, CP64, CS64, CP74 and CS74 Vibratory Compactors C6.6 Engine Supplement Alternator - Remove and Install
CP56, CS56, CP64, CS64, CP74 and CS74 Vibratory Compactors C6.6 Engine Supplement Gear Motor (Hydraulic Fan) - Assemble
279C2 Compact Track Loader and 287C, 277C, 277C2 and 297C Multi Terrain Loaders Engine Supplement Gear Motor (Fan, Aftercooler) - Disassemble
279C2 Compact Track Loader and 287C, 277C, 277C2 and 297C Multi Terrain Loaders Engine Supplement Gear Motor (Fan, Aftercooler) - Assemble
777G Off-Highway Truck Power Train Hydraulic and Transmission Tank (Torque Converter, Hoist, Brake) - Install
14L Motor Grader Power Train Rear Axle
IT38H Integrated Toolcarrier and 938H Wheel Loader Engine Supplement Engine Compartment Shield - Remove and Install
2007/03/05 An Improved Hose Assembly in the Water Lines Group {1380}
770, 772, 773F and 777F Off-Highway Truck/Tractors and 775F Quarry Truck Monitoring System Monitor Menu
CP56, CS56, CP64, CS64, CP74 and CS74 Vibratory Compactors C6.6 Engine Supplement Muffler - Remove and Install
279C2 Compact Track Loader and 287C, 277C, 277C2 and 297C Multi Terrain Loaders Engine Supplement Gear Motor (Fan, Aftercooler) - Remove
816F Series 2 Landfill Compactor, 815F Series 2 Soil Compactor and 814F Series 2 Wheel Dozer MID 081 - CID 0562 - FMI 09
816F Series 2 Landfill Compactor, 815F Series 2 Soil Compactor and 814F Series 2 Wheel Dozer MID 081 - CID 1693 - FMI 00
2007/09/10 An Improved Rotary Beacon is Now Used on Cold Planers {1431}