Engine Oil Pump - Install
安装步骤
Show/hide table
| 所需工具 | |||
| 工具 | 零件号 | 零件描述 | 数量 |
| A | 138-7575 | 连杆支架 | 2 |
- 安装 O 形密封圈 (41) 。 安装 O 形密封圈 (40) 。 安装管 (39) 。 安装螺栓 (38) 。 安装壳体 (37) 。 安装螺栓 (36) 。
Show/hide table
 | |
| 图 1 | g01405651 |
Show/hide table
 | |
| 图 2 | g01405650 |
- 将调节阀的阀杆 (32) 、垫片 (33) 、挡圈 (34) 和弹簧 (35) 安装到调节器组件 (17) 中。 将最大压力安全阀的阀杆 (28) 、垫片 (29) 、挡圈 (30) 和弹簧 (31) 安装到调节器组件 (17) 中。
Show/hide table
 | |
| 图 3 | g01405649 |
- 安装 O 形密封圈 (27) 。
Show/hide table
 | |
| 图 4 | g01595844 |
- 将盖 (26) 和螺栓安装到调节器组件 (17) 上。
Show/hide table
 | |
| 图 5 | g01830496 |
Show/hide table
 |
弹簧压缩零件如果安装不当，会伤害人体。 为避免伤害，遵照出版的装配程序，并穿上保护装备。 |
- 将工具 (A) 和适当的起吊设备连接到发动机机油泵 (21) 上。 发动机机油泵 (21) 的重量约为 67 kg (148 lb)。 将发动机机油泵 (21) 定位到发动机上。 安装螺栓 (25) 。
Show/hide table
 | |
| 图 6 | g01830495 |
- 将 O 形密封圈安装到发动机机油泵 (21) 上。 将适配器 (22) 和螺栓安装到发动机机油泵 (21) 上。 安装 O 形密封圈和弯头 (23) 。 定位板 (24) 然后安装垫圈和螺母。
Show/hide table
 | |
| 图 7 | g01830494 |
- 定位交流发电机的安装总成 (18) 。 安装支架螺栓。 安装螺栓 (19) 。
- 将适当的起吊设备连接到调节器组件 (17) 上。 调节器组件 (17) 的重量约为 51 kg (113 lb)。 将调节器组件 (17) 定位到发动机机油泵 (21) 上。 安装螺母和螺栓 (20) 。 连接线束组件 (16) 。
- 定位底盖 (15) 和弯头 (13) 。 安装螺栓 (14) 。
Show/hide table
 | |
| 图 8 | g02041735 |
- 定位法兰 (12) 和管组件 (10) 。 安装螺栓 (9) 和 (11) 。
- 定位管组件 (8) 并安装螺栓 (6) 。 连接软管组件 (7) 和 (5) 。
Show/hide table
 | |
| 图 9 | g02041734 |
- 安装密封垫 (3) 和进气歧管 (1) 的末尾段。 连接卡箍 (4) 。 安装螺栓 (2) 。
Caterpillar Information System:
246C, 256C, 262C, 262C2 and 272C Skid Steer Loaders Machine Systems Gear Pump
814F Series 2 Wheel Dozer, 815F Series 2 Soil Compactor and 816F Series 2 Landfill Compactor Power Train Transmission Oil Pump - Remove
2006/11/06 Correction to Assembly Procedure for the 793D Off-Highway Truck {7960}
246C, 256C, 262C, 262C2 and 272C Skid Steer Loaders Machine Systems Gear Pump
279C, 279C2, 289C, 289C2 and 299C Compact Track Loaders Machine Systems Undercarriage
C175-16 and C175-20 Engines for Caterpillar Built Machines Engine Oil Pump - Remove
246C, 256C, 262C, 262C2 and 272C Skid Steer Loaders Machine Systems Piston Motor (Hydrostatic)
2006/11/20 An Improved Handle Control Group is Now Available {5063, 5705}
816F Series 2 Landfill Compactor, 815F Series 2 Soil Compactor and 814F Series 2 Wheel Dozer Machine Systems Accumulator Charging Valve (Brake) - Assemble
816F Series 2 Landfill Compactor, 815F Series 2 Soil Compactor and 814F Series 2 Wheel Dozer Machine Systems Accumulator Charging Valve (Brake) - Disassemble
816F Series 2 Landfill Compactor, 815F Series 2 Soil Compactor and 814F Series 2 Wheel Dozer Machine Systems Selector and Pressure Control Valve (Pilot) - Assemble
816F Series 2 Landfill Compactor, 815F Series 2 Soil Compactor and 814F Series 2 Wheel Dozer Machine Systems Selector and Pressure Control Valve (Pilot) - Disassemble
777E, 777F and 777G Off-Highway Truck Engine and Torque Converter - Install
814F Series 2 Wheel Dozer, 815F Series 2 Soil Compactor and 816F Series 2 Landfill Compactor Power Train Transmission Oil Pump - Install
246C, 256C, 262C, 262C2 and 272C Skid Steer Loaders Machine Systems Work Tool Hydraulic System - Standard Flow
814F Series 2 Wheel Dozer, 815F Series 2 Soil Compactor and 816F Series 2 Landfill Compactor Power Train Modulating Valve (Transmission Clutch) - Remove
PL61 Pipelayer and D6K Track-Type Tractor MID 039 - CID 2211 - FMI 04
814F Series 2 Wheel Dozer, 815F Series 2 Soil Compactor and 816F Series 2 Landfill Compactor Power Train Modulating Valve (Transmission Clutch) - Install
RM-500 Road Reclaimer/Soil Stabilizer Machine Systems Heater Lines (Emulsion Spray)
2006/12/04 Improved Keypads Are Now Available {7490}
814F Series 2 Wheel Dozer, 815F Series 2 Soil Compactor and 816F Series 2 Landfill Compactor Power Train Torque Converter from Transmission, Output Transfer Gears - Separate
777G Off-Highway Truck Machine Systems Service and Parking Brake (Rear) - Remove
777G Off-Highway Truck Machine Systems Steering Link - Remove and Install
2006/11/20 Correction to Disassembly and Assembly , "Main Control Valve - Disassemble" {5051}