Drop Arm - Remove
Removal Procedure
Start By:
- Remove the thickness control group. Refer to Disassembly and Assembly, "Thickness Control - Remove".
- Remove bolts (2) and cover plate (1) .
Show/hide table
 | |
| Illustration 1 | g01304619 |
- Bend the tab off bolt (3). Loosen bolt (3) .
Show/hide table
 | |
| Illustration 2 | g01304676 |
- Attach a suitable lifting device to drop arm (4). The weight of drop arm (4) is approximately 53 kg (117 lb).
Show/hide table
 | |
| Illustration 3 | g01304620 |
- Remove bolt (5), pivot pin assembly (6), and drop arm (4) .
Show/hide table
 | |
| Illustration 4 | g01304621 |
Caterpillar Information System:
C9 Engines for Motor Graders Sensor Signal (Analog, Passive) - Test
TK711, TK721, TK722, TK732, TK741, TK751 and TK752 Track Feller Bunchers IQAN MDM Monitor Fault ; Event Codes VREF-A Error IQAN Lx A0
G3600 Engines ECM Software - Install
AS3251C Asphalt Paver Chain (Crown) - Remove and Install
450E Backhoe Loader Hydraulic and Steering System Hydraulic Hand Control (Backhoe)
2006/11/27 An Updated Gasket for the Water Temperature Regulator Housing is Available {1355, 1380, 1393}
2006/11/27 An Updated Gasket for the Water Temperature Regulator Housing is Available {1355, 1380, 1393}
C11 and C13 Engines and 14M and 16M Motor Graders Sensor Signal (Analog, Active) - Test
AccuGrade® Laser Diagnostic Code List
814F Series 2 Wheel Dozer, 815F Series 2 Soil Compactor and 816F Series 2 Landfill Compactor Power Train Torque Converter Stall - Test
TK711, TK721, TK722, TK732, TK741, TK751 and TK752 Track Feller Bunchers IQAN MDM Monitor Fault ; Event Codes CHECKSUM Error IQAN MDM
TK711, TK721, TK722, TK732, TK741, TK751 and TK752 Track Feller Bunchers IQAN MDM Monitor Fault ; Event Codes RTC+ Not Connected IQAN MDM
793D Off-Highway Truck Jacking Locations
AS3301C Asphalt Screed Drop Arm - Disassemble
AS3301C Asphalt Screed Drop Arm - Assemble
AS3301C Asphalt Screed Drop Arm - Install
AS3251C Asphalt Paver Platform - Remove and Install
AS3251C Asphalt Paver Screed - Remove and Install
AS3251C Asphalt Paver Thickness Control - Remove
AS3301C Asphalt Screed Thickness Control - Disassemble
AS3301C Asphalt Screed Thickness Control - Assemble
AS3251C Asphalt Paver Thickness Control - Install
C11 and C13 Engines and 14M and 16M Motor Graders Sensor Supply - Test
G3304B and G3306B Engines Valve Lash Is Excessive