AS2302 Screed Caterpillar


Extender Carriage

Usage:

AS2302 AYC



Illustration 1g01298125

(1) Apply 9S-3263 Thread Lock Compound to the twenty-four 8T-8917 Bolts.

(2) Apply 9S-3263 Thread Lock Compound to the four 5S-2389 Bolts.

(3) Apply 4C-5593 Anti-Seize Compound and tighten the inboard 8I-0184 Adjustment Nut to the following torque. ... 150 ± 10 N·m (110 ± 7 lb ft)

(3) Apply 4C-5593 Anti-Seize Compound and tighten the remaining two 8I-0184 Adjustment Nuts to the following torque. ... 30 ± 10 N·m (22 ± 7 lb ft)

(4) Tighten the six ID-5118 Nuts to the following torque. ... 200 ± 40 N·m (150 ± 30 lb ft)

(5) Apply 7X-7699 Lubricating Grease to the wear plates. There are four wear plates on each extender.

(6) Apply 9S-3263 Thread Lock Compound to the twenty-four 8T-9389 Bolts.

Caterpillar Information System:

IT38H Integrated Toolcarrier and 938H Wheel Loader Cab Air Filter - Clean/Replace
IT38H Integrated Toolcarrier and 938H Wheel Loader Axle Oil Cooler Magnetic Filter - Clean/Replace
2006/08/14 A New Saw Pump Is Used on Track Feller Bunchers {5070}
C-9 Engines for Caterpillar Built Machines Speed/Timing Sensor
PL61 Pipelayer Fuel System Primary Filter - Clean/Replace
C15 Petroleum Generator Set Engines Inlet Air Temperature Sensor
TK711, TK721, TK722, TK732, TK741, TK751 and TK752 Track Feller Bunchers IQAN MDM Monitor Fault ; Event Codes Input High Error IQAN XT2 A0-25
793D Off-Highway Truck Power Train Flow Control and Relief Valve (Rear Axle Oil) - Assemble
793D Off-Highway Truck Power Train Flow Control and Relief Valve (Rear Axle Oil) - Disassemble
572R Series II Pipelayer Transmission Magnetic Screen - Clean
Procedure for Kidney Looping Wheel Harvester and Site Prep Tractor Hydraulic Oil{0680, 0738, 0768, 3000, 5050, 5056} Procedure for Kidney Looping Wheel Harvester and Site Prep Tractor Hydraulic Oil{0680, 0738, 0768, 3000, 5050, 5056}
2006/08/14 An Improved Weld Is Now Used on the Undercarriage on Track Feller Bunchers {4150}
777G Off-Highway Truck Power Train Duo-Cone Seals - Install
2006/11/06 New Seal Kit for Fan Motors {1386, 5061}
PM-201 Cold Planer Rotor Coolant Level - Check - Drum with Three-Piece Rotor Bits
IT38H Integrated Toolcarrier and 938H Wheel Loader Engine Crankcase Breather - Clean - If Equipped
IT38H Integrated Toolcarrier and 938H Wheel Loader Fuel Tank Water and Sediment - Drain
120M, 12M, 140M and 160M Motor Graders Power Train Pressure Switch (Parking Brake)
770, 772, 773E, 773F, 777E and 777F Off-Highway Trucks and 775F Quarry Truck VIMS Truck Payload System Connector Contact Description
PM-200 Cold Planer Rotor Cutter Bits - Inspect/Replace - Drum with Three-Piece Rotor Bits
120M, 12M, 140M and 160M Motor Graders Power Train Solenoid Valve (Parking Brake)
773F, 773F OEM, 777F and 777F OEM Off-Highway Trucks and 775F and 775F OEM Quarry Truck Vital Information Management System (VIMS) System Schematic
770, 772, 773E, 773F, 777E and 777F Off-Highway Trucks and 775F Quarry Truck VIMS Truck Payload System CID 0267 - FMI 01
770, 772, 773E, 773F, 777E and 777F Off-Highway Trucks and 775F Quarry Truck VIMS Truck Payload System CID 0533 - FMI 02
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.