Starting AQMStudio
 | |
| Illustration 1 | g01266594 |
Use the "Start" menu in order to configure AQMStudio. AQMStudio can be found under the "Aquila" drop-down menu under the "Program" menu. Refer to Illustration 1.
AQMStudio main screen
 | |
| Illustration 2 | g01266600 |
From the "Options" menu, select "Settings". Refer to illustration 2.
AQMStudio configuration screen
 | |
| Illustration 3 | g01266603 |
(1) Input file configuration (2) Output file configuration (3) Map units (4) "Choose" button (5) Text size in meters | |
Configure the following settings:
- Input file configuration (1)
- Output file configuration (2)
- Map units (3)
- Text size in meters (5)
Input file configuration
The input file must be in a Aquila "MapReaderScope.cfg" file format. In order to choose the folder for storage of the MapReaderScope files, select one of the following options:
- Typing the full path (1)
- Using the "choose" button (4)
Output file configuration
The output file must be in a Aquila "MapReaderScope.cfg" format. In order to choose the folder for storage of the MapReaderScope files, select one of the following options:
- Typing the full path (2)
- Using the "choose" button (4)
Map units
In order to specify the unit of measurement for the map, select a value.
Text size in meters
In order to specify the size of the hole labels, choose a value in meters. 1 meter is about 3.28 feet. The size of the text is modified by this configuration, and the option does not affect the drill displays.
After the configuration is complete, click on the "OK" button in order to save these settings and return to the main screen.