Power Supply Circuit of Electronic Control Module
系统运作描述:
电路超载会导致保险丝熔断或断路器跳闸。 例如，蓄电池正极接线对接地短路。 如果 ECM 电源电路上保险丝熔断或断路器跳闸，将不记录诊断代码。 出现故障的电源电路将导致诊断代码 CID 0248 FMI 09 相应于 MID 027 记录。
测试步骤 1. 检查保险丝/断路器
当机器的电子部件无法工作且诊断代码不可用时，检查部件的适当保险丝/断路器。
- 检查所有保险丝和断路器。
预期结果:
所有保险丝和断路器应正常。
结果:
- 是 - 所有保险丝和断路器应正常。 先退出本步骤，然后重新进行一次。停止
- 否 - 所有保险丝和断路器都不正确。
修复: 更换熔断的保险丝或使断路器复位。
停止
Caterpillar Information System:
773E, 773F, 775F, 777E, and 777F Off-Highway Truck Brake Electronic Control System Switch Circuits
Connecting Rod Bearings{1218, 1219} Connecting Rod Bearings{1218, 1219}
992G Wheel Loader and 854G Wheel Dozer Power Train Speed Sensor (Transmission Output)
C27 and C32 Engines for Caterpillar Built Machines Camshaft - Install - C27
773E and 773F Off-Highway Truck and 775E and 775F Off-Highway Truck Suspension Cylinder Rear Suspension (Cylinder)
C27 and C32 Engines for Caterpillar Built Machines Cylinder Head - Install - C27
C27 and C32 Engines for Caterpillar Built Machines Cylinder Head - Remove - C27
C27 and C32 Engines for Caterpillar Built Machines Flywheel Housing - Remove and Install - C27
773F and 775F Off-Highway Truck Reference Material
C27 and C32 Engines for Caterpillar Built Machines Valve Mechanism Cover - Remove and Install - C27
C27 and C32 Engines for Caterpillar Built Machines Fuel Filter Base - Install - C27
770 and 772 Off-Highway Truck Body Retaining Pin
568 GF and 568 LL Forest Machine Window Washer Reservoir - Fill
938H and IT38H Wheel Loader and Integrated Tool Carrier Power Train Pressure Switch (Power Train Oil Filter Bypass)
773F and 775F Off-Highway Truck Power Train Differential and Bevel Gear
AQUILATM AQMStudio Configuration
938H and IT38H Wheel Loader and Integrated Tool Carrier Power Train Transmission Hydraulic Control
AQUILATM AQMStudio General Information
AQUILATM AQMStudio Installation
AQUILATM AQMStudio Map File
RM-500 Road Reclaimer/Soil Stabilizer Machine Systems Hydraulic Cylinder (Hood Tilt) - Remove and Install
RM-500 Road Reclaimer/Soil Stabilizer Machine Systems Rotor Brake Pads - Remove and Install
C4.4 Industrial Engine Electronic Control System
2006/05/22 A New Storage Position for the Mud Guards Is Available when the Machine Is Transported {4220}