 | |
| Illustration 1 | g00927724 |
Typical top view of the steering linkage | |
 | |
| Illustration 2 | g01258910 |
View A-A (1) Clamp assembly (2) Rod for the steering link (D) 6.350 ± 1.530 mm (0.25 ± 0.06 inch) | |
 | |
| Illustration 3 | g00927727 |
Section C-C (1) Clamp assembly (2) Rod for the steering link (3) Nut | |
Note: The opening for the clamp assembly (1) must be aligned with the slots in the rod (2) for the steering link, as shown.
(3) Torque for nut ... 285 N·m (210 lb ft)
 | |
| Illustration 4 | g01271247 |
View B-B | |
(4) 8W-5396 Shim
- Thickness ... 1.0 mm (0.04 inch)
- Clearance between the top side of the steering arm and the frame ... 0.7 ± 0.6 mm (0.03 ± 0.02 inch)
 | |
| Illustration 5 | g01258936 |
Section E-E | |
Note: Use 4C-5593 Anti-Seize Compound in order to lubricate the components. Lubricate the taper and the threads of the ball studs. Also, lubricate the washer face of the nuts.
(6) Ball stud
(7) Install the dust cover dry.
(8) Torque for the four nuts that are located on the ball studs (6) of the cylinder mounting ... 1360 N·m (1000 lb ft)