2005/12/19 Caterpillar


A New Retaining Ring Is Available for the Transmission Clutches {3030, 3155}

Usage:

924G 3DZ
Integrated Toolcarrier:
IT24F (S/N: 4NN1-1519; 6KN1-364)
IT28G (S/N: EWF1-508; 8CR1-4076; 9AR1-1048; DBT1-1676; WAC1-622)
Wheel Loader:
924F (S/N: 4YN1-1903; 5NN1-1638; 6MN1-1036; 7PN1-765)
924Gz (S/N: 3DZ1-1048; WGX1-980; WGX983; AAB1-479; DFZ1-562; 6YW1-946; RTA1-552; RTA554-556)
924G (S/N: 3PZ1-1552; 9SW1-2428; DDA1-2627; DDA2646; DDA2670; DDA2677-2678; DDA2680; DDA2683-2684; DDA2687-2689; DDA2722-2725; DDA2756-2757; DDA2760-2761; DDA2775; DDA2777; WMB1-1010; WMB1016; RBB1-1196; 9SW1-2428; AAN1-1222)
924F (S/N: 4YN1-1903; 5NN1-1638; 6MN1-1036; 7PN1-765)
928G (S/N: 6XR1-3851; 7SR1-2267; DJD1-2323; DJD2326; DJD2328-2329; DJD2333; DJD2335-2337; DJD2339; DJD2342-2343; DJD2367-2369; DJD2372-2373; WLG1-888; WLG890-891; WLG897; WLG902; WLG904; WLG911-912)
930G (S/N: TFW1-383; TFW385-389; TFW394-397; TWR1-1615; TWR1617-1628; TWR1633-1637; TWR1639-1640; TWR1642; TWR1645-1646; TWR1650; TWR1671-1674; TWR1685-1687; TWR1690)
Service Magazine, SEPD0815, 19 December 2005, "A New Retaining ring is available for the transmission Clutches". Information in this article has been updated. Disregard this article. See the information that follows.

Description of Change: A new retaining ring is available in order to retain the forward high clutch, the second speed clutch and the third speed clutch on the listed machines.

The new retaining ring is a solid retaining ring. The new retaining ring replaces the former spiral lock ring. The new retaining ring improves the retention of the clutch components over the former design.

Adaptable To:




Illustration 1g01228718

A new 270-8670 Retaining Ring (1) replaces the former 9U-8875 Retaining Ring for use in retaining the following clutches in the transmissions on the listed machines:

  • Forward high clutch

  • Second speed clutch

  • Third speed clutch

The new 270-8670 Retaining Ring is effective on the machines that are listed in Table 1. The new retaining ring is directly adaptable to all earlier machines.

Table 1
Machines that Are Installed with the New 270-8670 Retaining Ring    
Model     Serial Number     Transmission Serial Number    
924G     S/N:DDA2628-2645,2647-2669,2671-2676,2679,2681-2682,2685-2686,2690-2721,2726-2755,2758-2759,2762-2774,2776,2778-UP     S/N:MRH7523-UP
S/N:TMA3049-UP    
S/N:DFZ563-UP
S/N:WGX981-982,984-UP
S/N:WMB1011-1015,1017-UP
S/N:RTA553,537-UP
S/N:RBB1197-UP
928G     S/N:DJD2324-2325,2327,2330-2332,2334,2338,2340-2341,2344-2366,2370-2371,2374-UP     S/N:EMA6922-UP    
S/N:WLG889,892-896,898-901,903,905-910,913-UP
930G     S/N:TWR1616,1629-1632,1638,1641,1643-1644,1647-1649,1651-1670,1675-1684,1688-1689,1691-UP     S/N:TPA1844-UP    
S/N:TFW384,390-393,398-UP
IT28G     S/N:EWF509-UP     S/N:EMA6922-UP    

Caterpillar Information System:

R1700G Load Haul Dump Transmission Oil - Change
R1700G Load Haul Dump Transmission Oil Filter - Replace
R1700G Load Haul Dump Hydraulic System Lift Cylinder - Type 1
R1700G Load Haul Dump Power Train Cab Mounting
R1700G Load Haul Dump Transmission Oil Level - Check
2005/12/26 A New Alternator Guard is Now Used {1405}
R1700G Load Haul Dump Window Wiper - Inspect/Replace - If Equipped
R1700G Load Haul Dump Window - Clean - If Equipped
420E, 430E, 432E, 434E, 442E and 444E Backhoe Loaders Hydraulic and Steering System Control Valve (Auxiliary)
R1700G Load Haul Dump Hydraulic System Lift Cylinder - Type 2
C175-16 and C175-20 Engines for Caterpillar Built Machines Electronic Unit Injector Sleeve - Install
420E, 430E, 432E, 434E, 442E and 444E Backhoe Loaders Hydraulic and Steering System Control Valve (Boom)
AP-1000D and BG-260D Asphalt Pavers Machine Systems Front Wheel Drive Manifold - Assemble
2006/01/30 Improved Operation of Light Switch {1434, 1435, 7451}
AP-1000D and BG-260D Asphalt Pavers Machine Systems Control Valve (Auxiliary) - Remove
AP-1000D and BG-260D Asphalt Pavers Machine Systems Control Valve (Auxiliary) - Install
Product Link Antenna Placement{7606} Product Link Antenna Placement{7606}
M325D and M330D Excavators Power Train Electronic Control System Travel Motor Control Function
RM-300 Soil Stabilizer Rotor Shear Disc Bolts - Inspect/Replace
2005/12/19 Welding On Fuel And Hydraulic Tanks {0353, 0679, 1273, 5056, 7000}
773D Off-Highway Truck and 775D Quarry Truck Lubricant Viscosities - Fluids Recommendations
C6.6 Engines for Caterpillar Built Machines General Information
C27 and C32 Engines for Caterpillar Built Machines Housing (Rear)
PM-201 Cold Planer Propel System Propel System
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.