Switch (Differential Lock)
Show/hide table
 | |
| Illustration 1 | g01532153 |
(1) Torque for the actuator ... 25 ± 5 N·m (18 ± 4 lb ft)
Show/hide table
 | |
| Illustration 2 | g01792356 |
View A-A | |
(2) 204-0775 Foot Switch As
- Contact position ... Normally open
- Contact rating (Amp) ... 14 VDC or 28 VDC
- Temperature range ... -40 to 121 °C (-40 to 250 °F)
- Installation torque ... 20 N·m (15 lb ft)
- Actuation point (B) ... 18.67 ± 0.25 mm (0.735 ± 0.010 inch)
- Contact rating (Amp) ... 14 VDC or 28 VDC
Note: The ball actuator end of the switch must be protected from water, dirt or other foreign matter which could restrict motion.
Caterpillar Information System:
793D Off-Highway Truck Power Train Differential and Bevel Gear
3500 Engines for Caterpillar Built Machines Turbocharger
416E, 420E and 430E Backhoe Loaders Hydraulic and Steering System Control Valve (Boom)(Mechanically Operated)
AP1000D and BG260D Asphalt Pavers Engine Supplement Fan - Remove and Install
AP1000D and BG260D Asphalt Pavers Engine Supplement Control Valve (Fan Drive) - Remove and Install
AP1055D and BG2455D Asphalt Pavers Engine Supplement Gear Pump (Fan Drive) - Remove
416E, 420E and 430E Backhoe Loaders Hydraulic and Steering System Control Valve (Swing)(Mechanically Operated)
793D Off-Highway Truck Power Train Gear Pump (Rear Axle Oil)
3500 Engines for Caterpillar Built Machines Turbocharger
Installing the 258-4127 Work Tool Wiring Kit {1408} Installing the 258-4127 Work Tool Wiring Kit {1408}
Installing the 258-3915, 294-5580 Work Tool Positioner Kit (SELF-LEVELING HYDRAULICS){1435, 5057, 5112, 5264, 5479} Installing the 258-3915, 294-5580 Work Tool Positioner Kit (SELF-LEVELING HYDRAULICS){1435, 5057, 5112, 5264, 5479}
C4.4 and C6.6 Industrial Engines and Engines for Caterpillar Built Machines Customer Specified Parameters Table
AP1000D and BG260D Asphalt Pavers Engine Supplement Gear Motor (Fan Drive) - Remove
416E, 420E and 430E Backhoe Loaders Hydraulic and Steering System Control Valve (Auxiliary) (Mechanically Operated)
AP1000D and BG260D Asphalt Pavers Engine Supplement Radiator, Air Cooler, and Hydraulic Oil Cooler - Remove
14M and 16M Motor Graders Hydraulic and Steering System Wheel Lean Cylinder
416E, 420E and 430E Backhoe Loaders Hydraulic and Steering System Control Valve (Stabilizer) (Mechanically Operated)
2005/09/12 The Tube Assembly in the Frame has been Updated {7051}
Bucket Stops Provide Additional Protection For Tilt Cylinder {6001, 6119} Bucket Stops Provide Additional Protection For Tilt Cylinder {6001, 6119}
966H Wheel Loader and 972H Wheel Loader Electrohydraulic System MID 082 - CID 1326 - FMI 02
966H Wheel Loader and 972H Wheel Loader Electrohydraulic System MID 082 - CID 1639 - FMI 02
966H Wheel Loader and 972H Wheel Loader Electrohydraulic System MID 082 - CID 1639 - FMI 09
2005/12/19 New Product Link Software Is Now Available {7606, 7620}
R1600G Load Haul Dump 3176C Engine Supplement Steering Frame Lock - Remove and Install