Output Transfer Gears
Show/hide table
Illustration 1 | g02939876 |
Front view |
Show/hide table
Specification for 249-8173 Output Transfer Gear Gp and 249-8175 Output Transfer Gear Gp     | |||
Item     | Qty     | Part     | Specification Description     |
1     | 2     | 193-2550 Speed Sensor Gp     | Final installation torque is 25 ± 5 N·m (221 ± 44 lb in).     |
2     | 19     | 6V-4248 Bolt     | Torque to 60 ± 12 N·m (44 ± 9 lb ft).     |
3     | 10     | 6V-1820 Bolt     | Torque to 70 ± 15 N·m (52 ± 11 lb ft).     |
4     | 1     | 6V-1720 Serial Number Plate     | Apply Loctite 330.     |
5     | 1     | 129-6329 Lever     | Push lever to make certain that the brake cam is in contact with the brake shoes when setting the lever position to the dimension of (D) .     |
D     | -     | -     | Dimension is 56 ± 15 mm (2.2 ± 0.6 inch).     |
Show/hide table
Illustration 2 | g02939917 |
Show/hide table
Item     | Qty     | Part     | Specification Description     |
6     | 1     | 7S-8554 O-Ring Seal     | Lubricate bore lightly with lubricant that is being sealed.     |
7     | 2     | 193-2200 Lip Type Seal     | Lubricate sealing lip lightly with lubricant that is being sealed. Install seal flush with face of bearing cage.     |
8     | 1     | 5F-3144 O-Ring Seal     | Lubricate bore lightly with lubricant that is being sealed.     |
9     | 1     | As required, use the following shim pack in order to obtain end play of 0.10 ± 0.05 mm (0.004 ± 0.002 inch):     |
|
188-5046 Shim Pack | Total thickness is 2.4 mm (0.09 inch). Thickness of six shims is 0.05 mm (0.002 inch). Thickness of seven shims is 0.3 mm (0.01 inch). |
||
10     | 4     | 202-6473 Bolt     | Torque to 300 ± 40 N·m (221 ± 30 lb ft).     |
11     | 8     | 6A-5591 Bolt     | Torque to 105 ± 20 N·m (77 ± 15 lb ft).     |
12     | 2     | 2H-3088 O-Ring Seal     | Lubricate bore lightly with lubricant that is being sealed.     |
13     | 1     | As required, use the following shim pack in order to obtain end play of 0.08 ± 0.03 mm (0.003 ± 0.001 inch):     |
|
6I-8497 Shim Pack | Total thickness is 2.1 mm (0.08 inch). Thickness of six shims is 0.05 mm (0.002 inch). Thickness of six shims is 0.30 mm (0.012 inch). |
||
14     | 1     | 3J-0634 O-Ring Seal     | Lubricate bore lightly with lubricant that is being sealed.     |
15     | 1     | 138-1509 Ecology Drain Gp     | Apply white Loctite Breakloose PST to threads. Torque to 100 ± 10 N·m (74 ± 7 lb ft).     |
16     | 1     | 3H-2652 O-Ring Seal     | Lubricate bore lightly with lubricant that is being sealed.     |
17     | 1     | 2H-3927 O-Ring Seal     | Lubricate bore lightly with lubricant that is being sealed.     |
Caterpillar Information System:
725 and 730 Articulated Trucks Machine Systems Seat - Remove and Install
725 and 730 Articulated Trucks Circuit Breakers - Reset
C4.4 and C6.6 Industrial Engines and Engines for Caterpillar Built Machines CID 1779 FMI 06
C4.4 and C6.6 Engines for Caterpillar Built Machines Engine Speed/Timing Sensor Circuit - Test
AP-1055D and BG-2455D Asphalt Pavers Machine Systems Piston Pump (Hydraulic Generator) - Disassemble
C4.4 and C6.6 Industrial Engines and Engines for Caterpillar Built Machines CID 1779 FMI 05
C4.4 and C6.6 Industrial Engines and Engines for Caterpillar Built Machines CID 1743 FMI 02
C4.4 and C6.6 Industrial Engines and Engines for Caterpillar Built Machines CID 0774 FMI 08
C4.4 and C6.6 Industrial Engines and Engines for Caterpillar Built Machines CID 0774 FMI 04
C4.4 and C6.6 Industrial Engines and Engines for Caterpillar Built Machines CID 0774 FMI 03
R1600G Load Haul Dump Steering System Control Valve (Wheel Steering)
R1600G Load Haul Dump Steering System Control Valve (STIC Steering)
C13, C15, and C18 Tier 4 Final Engines Valve Mechanism
14M and 16M Motor Graders Braking and Hydraulic Fan System Pump Control Valve (Brake, Hydraulic Fan)
R1600G Load Haul Dump Steering System Steering System Troubleshooting
R1600G Load Haul Dump Steering System Valve (Steering Lockout) - Test
R1600G Load Haul Dump Steering System Steering Time - Check - STIC Steering
R1600G Load Haul Dump Steering System Steering Control Valve - Adjust
R1600G Load Haul Dump Steering System Steering Neutralizer Valve - Check and Adjust
R1600G Load Haul Dump Steering System Pressure Reducing Valve (Steering Pilot) - Test and Adjust
CAES ULTRA Machine Control ; Guidance Products Computer Aided Earthmoving System MineStar Machine Configuration File
583T Pipelayer Lifting and Tying Down the Machine
Tier I Level Emissions Engine Repower for a 12G Motor Grader{1000} Tier I Level Emissions Engine Repower for a 12G Motor Grader{1000}
793D Off-Highway Truck Air System and Brakes Traction Control Valve