Engine Oil Level - Check
Show/hide table
| 注意 |
|---|
发动机曲轴箱注油时，油不要过少或过满。 任何一种情况都会造成发动机损坏。 |
Show/hide table
| 注意 |
|---|
在检验、保养、测试、调整及维修发动机时，请小心确保盛接流出的液体。 在打开或拆解任何储有液体的部件之前，要准备好合适的容器收集液体。 有关适合收集和盛接卡特彼勒产品上的液体的工具和供应品，请参阅专门出版物, NENG2500, "卡特彼勒代理商工具目录"。 按照本地法规和条例处置所有液体。 |
- 打开机器右后侧的发动机检修门。 发动机油尺位于发动机右侧机油滤清器附近。
Show/hide table
 | |
| 图 1 | g01178745 |
- 拆下发动机油尺 (2) ，用干净的抹布擦干油尺。 然后，先插入油尺，再取出油尺。 这将确保发动机油位测量更为准确。
- 发动机停机时，检查发动机油尺 (2) "发动机停机（ENGINE STOPPED）"侧的油位。 使油面保持在油尺标记之间。
发动机运转时，检查发动机油尺 (2) "发动机运转（ENGINE RUNNING）"侧的油位。 使油面保持在油尺标记之间。
- 必要时，卸下加注口塞 (1) ，通过加油管加油。
注: 不要使用位于气门室盖顶部的加注口塞。 向发动机加注机油时，使用朝向发动机前端的加注口管 (1) 。
- 清洁并安装机油加注口塞。
- 关闭发动机检修门。
Caterpillar Information System:
420E, 430E, 432E, 434E, 442E and 444E Backhoe Loaders Belts - Inspect/Adjust/Replace
2005/06/13 New Pins for the Bulldozer Blade are Now Greased {6053, 6060, 6061, 6066, 6078, 6156}
C9 Engine for Caterpillar Built Machines Pump Drive - Remove
RM-300 Reclaimer Mixer Engine Supplement Engine and Clutch Assembly - Install
814F Series 2 Wheel Dozer, 815F Series 2 Soil Compactor and 816F Series 2 Landfill Compactor Engine Oil (High Speed) and Oil Filter - Change - If Equipped
950H Wheel Loader, 962H Wheel Loader and IT62H Integrated Toolcarrier Steering System Monitoring System (Steering Functions)
986H Wheel Loader Machine Systems Solenoid Valve (Pilot Proportioning)
814F Series 2 Wheel Dozer, 815F Series 2 Soil Compactor and 816F Series 2 Landfill Compactor Cooling System Water Temperature Regulator - Replace
950H Wheel Loader, 962H Wheel Loader and IT62H Integrated Toolcarrier Steering System General Information (Steering) - HMU Steering
950H Wheel Loader, 962H Wheel Loader and IT62H Integrated Toolcarrier Steering System General Information (Steering) - Command Control Steering
966H Wheel Loader and 972H Wheel Loader Braking and Hydraulic Fan System Brake Accumulator - Test and Charge
814F Series 2 Wheel Dozer, 815F Series 2 Soil Compactor and 816F Series 2 Landfill Compactor Differential and Final Drive Oil - Change
950H Wheel Loader, 962H Wheel Loader and IT62H Integrated Toolcarrier Steering System Metering Pump (HMU Steering)
14L Motor Grader All Wheel Drive Electronic Control System Piston Pump (All Wheel Drive)
C13, C15, and C18 Tier 4 Final Engines Vibration Damper and Pulley
966H Wheel Loader and 972H Wheel Loader Electrohydraulic System Ride Control Valve
C-9 Engine for TK711, TK721, TK722, TK732, TK741, TK751, and TK752 Track Feller Bunchers Engine Cranks but Will Not Start
814F Series 2 Wheel Dozer, 815F Series 2 Soil Compactor and 816F Series 2 Landfill Compactor Engine Oil and Filter - Change
C9 Engine for Caterpillar Built Machines Pump Drive - Install
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System MID 039 - CID 0254 - FMI 12
950H Wheel Loader, 962H Wheel Loader and IT62H Integrated Toolcarrier Steering System Pilot Valve (Command Control Steering)
C15 and C18 Engines for Caterpillar Built Machines Piston and Rings
IT62H Integrated Toolcarrier and 950H and 962H Wheel Loaders C7 Engine Supplement Starting Aid (Air Inlet Heater) - Remove
IT62H Integrated Toolcarrier and 950H and 962H Wheel Loaders C7 Engine Supplement Starting Aid (Air Inlet Heater) - Install