Belts - Inspect/Adjust/Replace
如果安装新的皮带，到发动机运转 30 分钟之后，检查皮带的调整量。 对多条皮带驱动的应用，总是成组更换皮带。 如果只更换一组中的一条皮带，由于旧皮带已被拉伸，会使新皮带承受更多的负载。 额外负载就会加到新皮带上，从而造成皮带断裂。
- 安装提升油缸支撑。 更多信息请参考 操作和维护手册, "提升油缸支撑 - 连接和断开" 。
- 卸下机器左侧上的发动机检修板。
- 检查空调机皮带及其调整的状况。 空调机皮带在110 N (25 lb)的力的作用下应下垂 10 mm (0.38 in) 。
Show/hide table
 | |
| 图 1 | g01178773 |
- 松开调整螺母 (1) 。 松开两个压缩机托架安装螺栓 (2) 。
- 移动压缩机，直至取得正确的皮带张紧度。
- 拧紧调整螺母 (1) 。 拧紧两个压缩机托架安装螺栓 (2) 。
- 再次测量皮带的挠度。 如果挠度值不正确，重复步骤 4 至步骤 6。
- 安装发动机检修板。
- 拆下机器右侧的发动机检修板。
- 检查交流发电机皮带的状况并调整交流发电机皮带。 交流发电机皮带在110 N (25 lb)的力的作用下应下垂 10 mm (0.38 in) 。
Show/hide table
 | |
| 图 2 | g01178833 |
- 松开安装螺栓 (3) 。 松开调整螺母 (4) 。
- 移动发电机直至达到正确的张紧度。
- 拧紧调整螺母 (4) 。 拧紧固定螺栓 (3) 。
- 再次测量皮带的挠度。 如果挠度值不正确，重复步骤 11 至步骤 13。
- 安装发动机检修板。
- 起动发动机。 将装载机臂升到最大高度。
- 卸下销并将装载提升臂的支撑装回到装载提升臂的存放位置。
- 将铲斗降至地面。
Caterpillar Information System:
2005/06/13 New Pins for the Bulldozer Blade are Now Greased {6053, 6060, 6061, 6066, 6078, 6156}
C9 Engine for Caterpillar Built Machines Pump Drive - Remove
RM-300 Reclaimer Mixer Engine Supplement Engine and Clutch Assembly - Install
814F Series 2 Wheel Dozer, 815F Series 2 Soil Compactor and 816F Series 2 Landfill Compactor Engine Oil (High Speed) and Oil Filter - Change - If Equipped
950H Wheel Loader, 962H Wheel Loader and IT62H Integrated Toolcarrier Steering System Monitoring System (Steering Functions)
986H Wheel Loader Machine Systems Solenoid Valve (Pilot Proportioning)
814F Series 2 Wheel Dozer, 815F Series 2 Soil Compactor and 816F Series 2 Landfill Compactor Cooling System Water Temperature Regulator - Replace
950H Wheel Loader, 962H Wheel Loader and IT62H Integrated Toolcarrier Steering System General Information (Steering) - HMU Steering
950H Wheel Loader, 962H Wheel Loader and IT62H Integrated Toolcarrier Steering System General Information (Steering) - Command Control Steering
966H Wheel Loader and 972H Wheel Loader Braking and Hydraulic Fan System Brake Accumulator - Test and Charge
814F Series 2 Wheel Dozer, 815F Series 2 Soil Compactor and 816F Series 2 Landfill Compactor Differential and Final Drive Oil - Change
C13, C15, and C18 Generator Set Engines Valve Mechanism Cover
814F Series 2 Wheel Dozer, 815F Series 2 Soil Compactor and 816F Series 2 Landfill Compactor Engine Oil Level - Check
950H Wheel Loader, 962H Wheel Loader and IT62H Integrated Toolcarrier Steering System Metering Pump (HMU Steering)
14L Motor Grader All Wheel Drive Electronic Control System Piston Pump (All Wheel Drive)
C13, C15, and C18 Tier 4 Final Engines Vibration Damper and Pulley
966H Wheel Loader and 972H Wheel Loader Electrohydraulic System Ride Control Valve
C-9 Engine for TK711, TK721, TK722, TK732, TK741, TK751, and TK752 Track Feller Bunchers Engine Cranks but Will Not Start
814F Series 2 Wheel Dozer, 815F Series 2 Soil Compactor and 816F Series 2 Landfill Compactor Engine Oil and Filter - Change
C9 Engine for Caterpillar Built Machines Pump Drive - Install
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System MID 039 - CID 0254 - FMI 12
950H Wheel Loader, 962H Wheel Loader and IT62H Integrated Toolcarrier Steering System Pilot Valve (Command Control Steering)
C15 and C18 Engines for Caterpillar Built Machines Piston and Rings
IT62H Integrated Toolcarrier and 950H and 962H Wheel Loaders C7 Engine Supplement Starting Aid (Air Inlet Heater) - Remove