Front Propel Pump Charge Filter - Replace
注: 排放和加注液压油时,首先进行清洁。 更换滤清器时,必须先进行清洁。 在清洁工作区域排放油和加油。 使用干净的工具。 确保手干净。 开始操作机器前,清洁液压油箱的外部。
- 见机器右侧在楼梯下面的液压油箱排放阀。
Show/hide table
图 2 g01163193 液压油箱排放阀俯视图 - 将临时排放软管连接到排放阀上。 将排放软管的另一端放到适当的容器内。
Show/hide table
图 3 g01163184 - 清洁加注口盖的周围。
- 松开加注口盖,平衡液压油箱的压力。
- 打开排放阀。 将机油排放到适当的容器中。 放出油,直到液压油箱变空。
- 关闭排放阀。
- 卸下排放阀的临时排放软管。
- 取走容器。
Show/hide table
图 1 | g01163215 |
Show/hide table
图 4 | g01156020 |
液压油滤清器位于机器右侧楼梯后面。 |
Show/hide table
图 5 | g01163051 |
前行走泵充油滤清器 |
- 在滤清器下面放一适当的容器。
- 从滤清器基座上卸下滤清器。
- 清洁滤清器底座。
- 安装新滤清器。
- 安装加注口盖。
- 向液压油箱加注干净的、符合要求的液压油。
- 关闭加注口盖。
- 起动机器。
- 使发动机运转几分钟。
- 检查是否泄漏。
- 停下机器。
- 修理所有泄漏的地方。
- 取走容器。 根据当地法规处理所有液体。 根据当地法规处理旧滤清器。 正确保养是您的职责。
- 机器投入工作后,继续检查有无泄漏。
注: 参阅操作和保养手册 , "一般危险事项"中关于盛放溢出液体的资料。
Caterpillar Information System:
2005/05/16 Service Replacement Relay is now Available {4493}
AP-1055D and BG-2455D Asphalt Pavers Auxiliary System Pump Control Valve (Generator) - Test and Adjust
AP-1055D and BG-2455D Asphalt Pavers Auxiliary System Pressure Reducing Valve - Test and Adjust
AP-1055D and BG-2455D Asphalt Pavers Auxiliary System Pump Control Valve (Auxiliary) - Test and Adjust
2005/05/30 Relocation of the Fuel Tank Vent Prevents Interference {1273}
CB-535B Vibratory Compactor Engine Air Precleaner - Clean
2005/06/13 Corrections To Steering System Pressures - Test and Adjust {4300, 4300}
140M Motor Grader Crankshaft Vibration Damper - Inspect
C4.4 Industrial Engine Engine Stopping
2005/07/11 A New Spindle Assembly Has An Improved Service Life {4001, 4201}
C4.4 Industrial Engine Fire Prevention and Explosion Prevention
583T Pipelayer Additional Messages
IT62H Integrated Toolcarrier and 950H and 962H Wheel Loaders Machine Systems Cab - Remove
RM-300 Soil Stabilizer Fuel System Secondary Filter - Replace
2005/05/09 A New Accumulator Charging Valve (Brake) is Available for Parts Service that Improves Service Life. {4264}
RM-300 Soil Stabilizer Fuel Tank Water and Sediment - Drain
AP-1055D and BG-2455D Asphalt Pavers Auxiliary System Gear Motor Case Drain Flow (Generator) - Test
RM-500 Soil Stabilizer Hydraulic System Oil Level - Check
RM-300 Soil Stabilizer Hydraulic System Oil - Change
RM-500 Soil Stabilizer Hydraulic Tank Screen - Clean
RM-300 Soil Stabilizer Rotor Drive Differential Breather - Replace
RM-300 Soil Stabilizer Rotor Drive Differential Oil - Change
RM-300 Soil Stabilizer Rotor Drive Differential Oil Level - Check
RM-300 Soil Stabilizer Tire Inflation - Check