Corrections To Steering System Pressures - Test and Adjust {4300, 4300}
- Telehandler:
- TH220B (S/N: SLA1-UP)
- TH330B (S/N: SLB1-UP)
- TH340B (S/N: SLC1-UP)
- TH350B (S/N: SLD1-UP)
- TH355B (S/N: JRK1-UP)
- TH360B (S/N: SLE1-UP)
- TH460B (S/N: SLF1-UP)
- TH560B (S/N: SLG1-UP)
- TH580B (S/N: SLH1-UP)
Changes have been made to tolerances on the pressure in the hand metering unit. The new tolerances will minimize the adjustments to the hand metering unit. The new tolerances became effective in production in the following machines: (S/N: SLA669), (S/N: SLB1184), (S/N: SLC747), (S/N: SLD1107), (S/N: JRK570), (S/N: SLE3717), (S/N: SLF1643), (S/N: SLG1008) and (S/N: SLH566).
In the "Steering Pressure Test" section, the tolerances in the Table 2 have been changed. Replace the former Table 2 with the following Table 2.
Show/hide table
Steering Pressure     | |
Model     | Pressure     |
TH220B, TH330B, 340B, TH350B, TH360B     | 16250 ± 1000 kPa (2350.0 ± 145.0 psi)     |
TH460     | 19250 ± 1000 kPa (2800.0 ± 145.0 psi)     |
TH560B S/N:SLG1-675     | 16250 ± 1000 kPa (2350.0 ± 145.0 psi)     |
TH560B S/N:SLG676-UP with axles 231-0707 or 231-0708 231-0709 or 231-0710     |
17750 ± 1000 kPa (2600.0 ± 145.0 psi)     |
TH580     | 17750 ± 1000 kPa (2600 ± 145.0 psi)     |
In the "Steering Pressure Adjustment" section, Step 4 has been changed. Replace the former Step 4 with the following Step 4.
- Clean the threads on the plug (3) with a cleaning solvent. Apply 5P-3413 Pipe Sealant to the threads of the plug. Install the plug. Torque the plug to 62.5 ± 2.5 N·m (46.00 ± 2.00 lb ft).
Show/hide table
Illustration 1 | g01162961 |
Caterpillar Information System:
140M Motor Grader Crankshaft Vibration Damper - Inspect
C4.4 Industrial Engine Engine Stopping
2005/07/11 A New Spindle Assembly Has An Improved Service Life {4001, 4201}
C4.4 Industrial Engine Fire Prevention and Explosion Prevention
583T Pipelayer Additional Messages
C7 Engines for Caterpillar Built Machines Piston and Rings
C6.6 Industrial Engine High Pressure Fuel Lines
2005/05/09 A Pressure Switch for the Hydraulic Lubrication System is Available {7540}
RM-300 Soil Stabilizer Engine Water Pump - Inspect
RM-300 Soil Stabilizer Engine Oil Level - Check
RM-300 Soil Stabilizer Engine Air Precleaner - Clean
RM-300 Soil Stabilizer Auxiliary Hydraulic System Filter - Replace
CB-535B Vibratory Compactor Engine Air Precleaner - Clean
2005/05/30 Relocation of the Fuel Tank Vent Prevents Interference {1273}
AP-1055D and BG-2455D Asphalt Pavers Auxiliary System Pump Control Valve (Auxiliary) - Test and Adjust
AP-1055D and BG-2455D Asphalt Pavers Auxiliary System Pressure Reducing Valve - Test and Adjust
AP-1055D and BG-2455D Asphalt Pavers Auxiliary System Pump Control Valve (Generator) - Test and Adjust
2005/05/16 Service Replacement Relay is now Available {4493}
RM-300 Soil Stabilizer Front Propel Pump Charge Filter - Replace
IT62H Integrated Toolcarrier and 950H and 962H Wheel Loaders Machine Systems Cab - Remove
RM-300 Soil Stabilizer Fuel System Secondary Filter - Replace
2005/05/09 A New Accumulator Charging Valve (Brake) is Available for Parts Service that Improves Service Life. {4264}
RM-300 Soil Stabilizer Fuel Tank Water and Sediment - Drain
AP-1055D and BG-2455D Asphalt Pavers Auxiliary System Gear Motor Case Drain Flow (Generator) - Test