Engine Oil Cooler - Install
Installation Procedure
Show/hide table
NOTICE |
---|
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids. Refer to Special Publication, NENG2500, "Caterpillar Tools and Shop Products Guide" for tools and supplies suitable to collect and contain fluids on Caterpillar products. Dispose of all fluids according to local regulations and mandates. |
- Position engine oil cooler (18) and install bolts (17). Install bracket (16). Install bolts (19) .
Show/hide table
Illustration 1 | g01157807 |
- Install bolts (15) .
Show/hide table
Illustration 2 | g01157806 |
- Position hose (13) and tighten clamps (14) .
Show/hide table
Illustration 3 | g01157803 |
- Connect hose (11). Install plug (12). Connect clip (10) .
Show/hide table
Illustration 4 | g01157800 |
- Install tube assembly (8). Connect hose assembly (9) .
Show/hide table
Illustration 5 | g01157788 |
- Position guard assembly (5) and clip (6). Install bolts (7) .
Show/hide table
Illustration 6 | g01157785 |
- Install hose (2) and elbow (3). Tighten clamps (1) and (4) .
Show/hide table
Illustration 7 | g01157783 |
- Fill the cooling system. Refer to Operation and Maintenance Manual, "Cooling System Coolant (ELC) - Change".
Caterpillar Information System:
769D Off-Highway Truck/Tractor and 771D Quarry Truck Engine Starting with Auxiliary Start Receptacle
AccuGrade® Laser (CB420) CB 25 Elevation Limit Left
AP-1055D and BG-2455D Asphalt Pavers Propel System Piston Pump Neutral - Test and Adjust
AP-1055D and BG-2455D Asphalt Pavers Propel System Pump Synchronization - Test and Adjust
AP-1055D and BG-2455D Asphalt Pavers Auxiliary System Hydraulic Oil Contamination - Test
AP-1055D and BG-2455D Asphalt Pavers Propel System Propel System Troubleshooting
769D Off-Highway Truck/Tractor and 771D Quarry Truck Towing With Inoperable Engine
Improving the Environment of the Operator{7301} Improving the Environment of the Operator{7301}
AP-1055D and BG-2455D Asphalt Pavers Propel System Visual Inspection
725, 730 and 730 Ejector Articulated Trucks Engine Supplement Engine Oil Cooler - Remove
2005/04/11 Correction to Troubleshooting "Fuel Actuator" {1716}
824H Wheel Dozer, 825H Soil Compactor and 826H Landfill Compactor Electrohydraulic System MID 082 - CID 1393 - FMI 04
120M, 12M, 140M and 160M Motor Graders Power Train Speed Sensor (Transmission) - Intermediate
769D Off-Highway Truck/Tractor and 771D Quarry Truck Maintenance Interval Schedule
769D Off-Highway Truck/Tractor and 771D Quarry Truck Window Washer Bottle - Fill
C15 and C18 Engines for Caterpillar Built Machines Alternator Mounting
2005/04/11 Tightness of Bolted Joints with the Torque Turn Procedure {1101, 1202, 1203, 1218}
2005/04/11 Tightness of Bolted Joints with the Torque Turn Procedure {1101, 1202, 1203, 1218}
C9 Engines for Caterpillar Built Machines Air Inlet Heater - Remove
AccuGrade® Laser (CB420) CB 23 Unsupported Device
AccuGrade® Laser (CB420) CB 27 Control Box Failure
AccuGrade® Laser (CB420) CB 28 Invalid Serial Number
2005/05/30 The Parking Brake Control Group Has Been Updated with a New Air Valve Assembly Which Improves Reliability {4282, 4284}
AccuGrade® Laser (CB420) CB 30 Duplicate Sensor Serial Number