Suction Fan and Gear Motor (Hydraulic Fan) - Install
Installation Procedure
Show/hide table
| NOTICE |
|---|
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids. Refer to Special Publication, NENG2500, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat products. Dispose of all fluids according to local regulations and mandates. |
- Position fan motor (20) and install bolts (19) .
Show/hide table
 | |
| Illustration 1 | g01157645 |
- Install boss (18) . Install nut (17) . Tighten nut (17) to a torque of 70 N·m (52 lb ft).
Show/hide table
 | |
| Illustration 2 | g01157698 |
- Position spider assembly (16) and install bolts (15) .
Show/hide table
 | |
| Illustration 3 | g01157632 |
- Attach a suitable lifting device to the suction fan and fan motor (13) and position the suction fan and fan motor (13) . The weight of the suction fan and fan motor (13) is approximately 50 kg (110 lb). Install bolts (14) .
Show/hide table
 | |
| Illustration 4 | g01157611 |
- Install guard assemblies (12) . Install tube assemblies (10) and (11) .
Show/hide table
 | |
| Illustration 5 | g01157598 |
- Position duct assembly (9) and install bolts (8) . Tighten clamp (7) to a torque of 13 ± 3 N·m (115 ± 27 lb in).
Show/hide table
 | |
| Illustration 6 | g01157584 |
Show/hide table
 | |
| Illustration 7 | g01157588 |
- Position cover assembly (5) and install bolts (6) (not shown). Install radiator cap (4) . Install support assembly (3) .
Show/hide table
 | |
| Illustration 8 | g01157573 |
- Position panel assembly (2) and install bolts (1) .
Show/hide table
 | |
| Illustration 9 | g01157571 |
End By: Install the exhaust extension. Refer to Disassembly and Assembly, "Exhaust Extension - Remove and Install".
Caterpillar Information System:
AccuGrade® Laser (CB420) CB 3 Calibration Failure
769D Off-Highway Truck/Tractor and 771D Quarry Truck Lowering the Body with Engine Stopped
2005/04/04 Correction to Testing and Adjusting , "Accumulator Charging Valve (Brake) - Test and Adjust" {4264}
2005/08/22 A New Lip Seal for the Output Transfer Gear Is Available {3159}
M325D MH Material Handler Safety Messages
725, 730 and 730 Ejector Articulated Trucks Engine Supplement Suction Fan and Gear Motor (Hydraulic Fan) - Remove
525C, 535C and 545C Wheel Skidders Machine Systems Brake Control Valve (Service) - Assemble
The Instructions for the Field Installation of the 222-4662 Diverter Valve and Mounting (Work Tool) for Certain Telehandlers{5066} The Instructions for the Field Installation of the 222-4662 Diverter Valve and Mounting (Work Tool) for Certain Telehandlers{5066}
824H Wheel Dozer, 825H Soil Compactor and 826H Landfill Compactor Electrohydraulic System MID 082 - CID 0650 - FMI 09
PM-201 Cold Planer Fuel System Secondary Filter - Replace
525C, 535C and 545C Wheel Skidders Machine Systems Brake Control Valve (Service) - Disassemble
Installation Guide for the 167-8711 Power Panel Gp on CAES{7604} Installation Guide for the 167-8711 Power Panel Gp on CAES{7604}
824H Wheel Dozer, 825H Soil Compactor and 826H Landfill Compactor Electrohydraulic System MID 082 - CID 0650 - FMI 11
824H Wheel Dozer, 825H Soil Compactor and 826H Landfill Compactor Electrohydraulic System MID 082 - CID 0650 - FMI 12
725, 730 and 730 Ejector Articulated Trucks Engine Supplement Crankshaft Vibration Damper and Pulley - Remove and Install
824H Wheel Dozer, 825H Soil Compactor and 826H Landfill Compactor Electrohydraulic System MID 082 - CID 1393 - FMI 04
2005/04/11 Correction to Troubleshooting "Fuel Actuator" {1716}
725, 730 and 730 Ejector Articulated Trucks Engine Supplement Engine Oil Cooler - Remove
AP-1055D and BG-2455D Asphalt Pavers Propel System Visual Inspection
Improving the Environment of the Operator{7301} Improving the Environment of the Operator{7301}
769D Off-Highway Truck/Tractor and 771D Quarry Truck Towing With Inoperable Engine
AP-1055D and BG-2455D Asphalt Pavers Propel System Propel System Troubleshooting
AP-1055D and BG-2455D Asphalt Pavers Auxiliary System Hydraulic Oil Contamination - Test
AP-1055D and BG-2455D Asphalt Pavers Propel System Pump Synchronization - Test and Adjust