Electronic Control Module - Remove and Install
拆卸步骤
- 松开六角头固定螺钉 (2) ,直到能够断开线束组件 (1) 。 断开线束组件 (1) 。
Show/hide table
图 1 | g01153932 |
- 断开软管组件 (4) 和 (5) 。
- 拆下螺栓 (6) 、垫圈和隔套。 拆卸电子控制模块 (3) 。
安装步骤
- 将电子控制模块 (3) 安置到缸体上。 安装螺栓 (6) 、垫圈和隔套。
Show/hide table
图 2 | g01153932 |
- 连接软管组件 (4) 和 (5) 。
- 连接线束组件 (1) 。 拧紧六角头固定螺钉 (2) 。
Caterpillar Information System:
12M, 140M and 160M Motor Graders Hydraulic and Steering System Location Of Components
C11 and C13 Engines Fuel Temperature Sensor
Installation of a 3306 Engine Emissions Upgrade Group for a 12G Motor Grader{1000} Installation of a 3306 Engine Emissions Upgrade Group for a 12G Motor Grader{1000}
C7 Engines for Caterpillar Built Machines Engine Oil Pan - Remove and Install
730 EJECTOR Articulated Truck Machine Systems Fan Drive System
730 EJECTOR Articulated Truck Frame and Body - Inspect
730 EJECTOR Articulated Truck Tailgate - Lubricate
C7 Engines for Caterpillar Built Machines Camshaft - Install
730 EJECTOR Articulated Truck Ejector Cylinder Pivot - Lubricate
C7 Engines for Caterpillar Built Machines Camshaft - Remove
C18 Engines for Caterpillar Built Machines 5 Volt Engine Pressure Sensor Supply Circuit - Test
C7 Engines for Caterpillar Built Machines Lifter Group - Remove and Install
PM-201 Cold Planer Machine Systems Metering Pump (Steering)
C18 Engines for Caterpillar Built Machines Engine Pressure Sensor Open or Short Circuit - Test
PM-201 Cold Planer Machine Systems Center Valve
PM-201 Cold Planer Machine Systems Rear Valve
PM-201 Cold Planer Machine Systems Auxiliary Pump
PM-201 Cold Planer Machine Systems Relief Valve (Steering)
PM-201 Cold Planer Machine Systems Control Valve (Moldboard)
R2900G Load Haul Dump Machine Systems Ride Control Accumulator - Remove
R2900G Load Haul Dump Machine Systems Ride Control Accumulator - Install
C18 Engines for Caterpillar Built Machines Coolant Flow Switch Circuit - Test
730 EJECTOR Articulated Truck Machine Systems Hydraulic Tank
C9 Engines for Caterpillar Built Machines Cylinder Block Cover - Remove and Install